Abstract:Cracks in rock and concrete have a great adverse effect on the stability of engineering structures; however, there are few studies on X-shaped fissures which widely exist in rock and concrete structures. Based on this background, three-point bending fracture tests of SCB specimens containing X-shaped fissures are carried out. The momentum equations in the SPH method are improved, and the crack propagations of SCB specimens under three-point bending are simulated. The results show that cracks grow simply along the vertical direction in the sample with no X-shaped fissures, and the existence of an X-shaped fissure changes the crack growth path and final failure modes of the SCB samples. The crack propagation simulation results are consistent with the experimental results, which verifies the rationality of the improved SPH method. The load–displacement curves mainly present three typical stages: the initial compaction stage, linear elastic deformation stage, and failure stage. The peak load decreases first then increases with an increase in eccentricity. With an increase in X-shaped fissure length and decrease in X-shaped fissure angle, the peak load decreases. The damage counts remain at 0 at the initial loading stage, corresponding to the initial compaction stage and the linear elastic deformation stage, and increase sharply at the later loading stage, corresponding to the failure stage, which is consistent with the experimental results. The influence mechanisms of X-shaped fissures on the crack propagation paths are discussed; the existence of different X-shaped fissure morphologies aggravate the tensile stress concentration at specific positions, leading to different crack propagation modes in the experiments. The research results can provide a certain reference for understanding the failure mechanisms of engineering structures containing X-shaped fissures and promote the applications of the SPH method into the simulations of cross-fissure crack propagations.

Simulation and Experimental Study on Crack Propagation in Slewing Bearing Steel

Subsurface propagation of partial ring cracks under rolling contactPart II. Fracture mechanics analysis

Cracking in a Fe–25Mn–3Si–3Al Steel

Subsurface propagation of partial ring cracks under rolling contact: Part I. Experimental studies

Numerical simulation of crack propagation of high strength steel

Micromechanism of Plastic Accumulation and Damage Initiation in Bearing Steels under Cyclic Shear Deformation: A Molecular Dynamics Study

The effect of friction on surface crack initiation in rolling contact fatigue considering damage accumulation

Extended crack propagation in nitrided and carburised steels subject to rolling contact fatigue

Vertical short-crack behavior and its application in rolling contact fatigue

Partial slip contact of materials with vertically aligned cracks near surface

Investigation of Crack Propagation Behaviour in Thin-Rim Gears: Experimental Tests and Numerical Simulations

The rotating-crack-model-based numerical simulation of SPCC beams

Investigation and prediction of central cracking in cross wedge rolling

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

Study on Fatigue Crack Growth in Rail Steel at Numerical and Experimental Approaches

Experimental Study on the Skidding Damage of a Cylindrical Roller Bearing

Experimental and Meshless Numerical Simulations on the Crack Propagation of Semi-Circular Bending Specimens Containing X-Shaped Fissures Under Three-Point Bending

Experimental and Numerical Investigations on Crack Intersection and Propagation of Concrete Structures

Experimental and numerical investigations of crack growth of hot-rolled steel Q420C using cohesive zone model

On the effect of microplasticity on crack initiation from subsurface defects in rolling contact fatigue