Abstract:Silicon carbide(SiC)is an important material for shielding nuclear fission products in tri-structural isotropic(TRISO)particles for high-temperature gas-cooled reactors.It has an important influence on the safety performance of TRISO particles.Therefore,it is necessary to study the irradiation behaviors and mechanical properties of the SiC layer of TRISO particles.The irradiation process and nanoindentation process can be described accurately by molecular dynamics simulations.It is helpful to analyze the irradiation behavior and mechanical properties of materials.In this paper,molecular dynamics simulations were used to study the irradiation behavior of equiaxed polycrys-talline and long-axis polycrystalline SiC layers obtained from experiments.The calculat-ed theoretical values of the irradiation swelling degree and mechanical properties of the SiC layer are in good agreement with the experimental values.It shows the strong appli-cability of the potential functions and other simulation system parameters used in this paper.The irradiation behavior of the SiC layer was studied in detail by swelling degree,density,atomic structure type,and point defect evolution.The results show that the grain structure of the SiC layer has no significant effect on its irradiation swelling and amorphization.The amorphization is not directly converted from the crystal structure to the amorphous structure during the irradiation process.The crystal structure is conver-ted into an intermediate state structure and then converted into an amorphous structure.The point defects are mainly C vacancies,Si interstitial atoms,and C antisite atoms in the early stage of irradiation.The difference between the ratio of C point defects and Si point defects gradually disappears after the irradiation dose tends to be saturated.The evolution of amorphization and point defects tends to start nearby the grain boundaries.Irradiation reduces the mechanical properties of SiC layers.It no longer has a significant effect on the mechanical properties of the SiC layer after the irradiation dose tends to be saturated.The changes in the mechanical properties of the SiC layer before and after irradiation were analyzed by load-depth curve and stress & strain.The results show that the decrease in mechanical properties of the SiC layer is closely related to the mechanical behaviors under external force.For example,the bearing capacity and plastic deforma-tion degree decrease,and the stress & strain distribution are disordered.The results provide a quantitative explanation for the irradiation behavior of the SiC layer of TRISO particles and the change of mechanical properties under irradiation.It is helpful to understand the irradiation behavior and relationship between the irradiation behavior and mechanical properties of the SiC layer.

The Study of the Raman Spectra of Sic Layers in Triso Particles

Evaluation of Thermal Conductivity of the Constituent Layers in TRISO Particles Using Raman Spectroscopy

Study of SiC layer with fine grains in HTGR coated fuel particles

Ultra-high temperature microstructural changes of SiC layers in TRISO particles

An Improved Design of TRISO Particle with Porous SiC Inner Layer by Fluidized Bed-Chemical Vapor Deposition

Irradiation-Thermal-Mechanical Coupling Behaviors of a Typical TRISO/SiC Fuel Element Based on Actual Distribution

Study of Raman Spectra for Γ-Al2o3 Models by Using First-Principles Method

Molecular Dynamics Simulation of Irradiation Behaviors and Mechanical Properties of SiC Layer of TRISO Particles

The Study of Irradiation-Induced Failure Behavior for the TRISO-coated Fuel Particle in HTGR

Improved measurement of local thermal conductivities of coatings by the steady-state Raman spectroscopy method: A case study in TRISO particles

Preparation of Silicon Carbide Coating Layer by Fluidized Bed Chemical Vapor Deposition Using a Halogen-Free Precursor

Effect of Ultra-High Temperature Treatment on Microstructures and Mechanical Properties of TRISO Particles

Oxidation mechanism of SiC coated layer in air atmosphere at 1400°C

Spotting the Differences in Two-Dimensional Materials - the Raman Scattering Perspective.

Handbook of SiC properties for fuel performance modeling

Properties of SiC Coated Layer for HTGR Fuel Particles

High Temperature Oxidation Behavior of SiC Coating in TRISO Coated Particles

[Study on Extracting Raman Spectra of Single Component and Structure from Impure Amorphous Spectra].

Design and preparation of SiC based novel coated fuel particle

Sensitivity study on triso fuel failure probability evaluation for htgr

Quantitative Raman Spectrum and Reliable Thickness Identification for Atomic Layers on Insulating Substrates