Abstract:Conformal chemical vapor deposition (CVD) of silicon carbide (SiC) from methyltrichlorosilane (MTS) and hydrogen (H2) onto high-aspect-ratio (HAR; typically >100:1) three-dimensional features has been a challenge in the fabrication of ceramic matrix composites. In this study, the impact of heterogeneous underlayers on the initial nucleation of SiC-CVD was studied using HAR (1000:1) microchannels with a tailored wetting underlayer of Si(100) and dewetting underlayers of thermally formed amorphous silicon dioxide (a-SiO2) and turbostratic boron nitride (t-BN). Incubation periods were distributed in the microchannels on a-SiO2 and t-BN underlayers, with the longest period of 70 min found at the feature-bottom due to a decreased concentration (C) of film-forming species. The longer incubation periods with more dewetting underlayers arose due to demoted initial nucleation. Prolonged incubation at the feature bottom led to poor conformality because thick films had already formed at the inlet when film formation began at the feature bottom. The incubation periods were eliminated by increasing the supply of MTS/H2, in accordance with classical heterogeneous nucleation theory. In the meantime, carbon-rich SiC films formed in the vicinity of dewetting a-SiO2 and t-BN underlayers at the feature bottoms, with greater carbon segregation on more dewetting underlayers. This was probably due to the deposition of pyrocarbons (CH4, C2H2, and/or C2H4) generated from MTS/H2 in the gas phase. Decreasing the temperature (T) from 1000 to 900 °C prevented carbon-rich film formation, and the expected deposition rate of pyrocarbon decreased to 0.6% for the case of CH4. A higher C of MTS/H2 combined with a lower T enabled conformal and stoichiometric film formation on the heterogeneous HAR features.

Preparation of Silicon Carbide Coating Layer by Fluidized Bed Chemical Vapor Deposition Using a Halogen-Free Precursor

An Improved Design of TRISO Particle with Porous SiC Inner Layer by Fluidized Bed-Chemical Vapor Deposition

Study of SiC layer with fine grains in HTGR coated fuel particles

Design and preparation of SiC based novel coated fuel particle

Properties of SiC Coated Layer for HTGR Fuel Particles

Preparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide As Coating Layers

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

Preparation of ZrC Coating in TRISO Fuel Particles by Precise Transportation of Solid Precursor and Its Microstructure Evolution

Oxidation mechanism of SiC coated layer in air atmosphere at 1400°C

SiC Coating on HTR Graphite Spheres Prepared by Fluidized-Bed Chemical Vapor Deposition

Preparation and Characterization of SiC Layer of Coated Fuel Particles for High-Temperature Gas-Cooled Reactor

Ultra-high temperature microstructural changes of SiC layers in TRISO particles

High Temperature Oxidation Behavior of SiC Coating in TRISO Coated Particles

Preparation of the Coated Nuclear Fuel Particle Using the Fluidized Bed-chemical Vapor Deposition (FB-CVD) Method

Deposition Of Zrc-Coated Particle For Htr With Zrcl4 Powder

Conformal and Stoichiometric Chemical Vapor Deposition of Silicon Carbide onto Ultradeep Heterogeneous Micropores by Controlling the Initial Nucleation Stage

Corrosion of SiC layers on coated zirconia particles in wet atmosphere

Preparation of Fine Grained Sic Layer by Fluidized Bed Chemical Vapor Deposition with Pulsed Propylene

Effects of Stoichiometry and High-Temperature Annealing on Zirconium Carbide Coating Layer in TRISO Particles

Large-scale Synthesis of Monodisperse SiC Nanoparticles with Adjustable Size, Stoichiometric Ratio and Properties by Fluidized Bed Chemical Vapor Deposition

Preparation, Performance and Nuclear Applications of Silicon Carbide Materials Prepared by FB-CVD Method