Abstract:Efficient capture,safe storage and release of tritium from the international thermonuclear experimental reactor（ITER） reaction exhaust gas is a perplexing problem,and the development of an efficient tritium-getter material with ultra-low hydrogenation equilibrium pressure is considered as a reliable way.In this work,Zr 2 Co alloy was selected as a tritium-getter material and prepared through induction levitation melting.Fundamental performance test results show that Zr 2 Co exhibits an ultra-low hydrogenation equilibrium pressure of 3.22 × 10 -6 Pa at 25℃ and excellent hydriding kinetics under a low hydrogen pressure of 0.005 MPa.Interestingly,unique phase transition behaviors were presented in Zr 2 Co-H system.Specifically,Zr 2 CoH 5 formed by Zr 2 Co hydrogenated at room temperature is initially decomposed into ZrH 2 and ZrCoH 3 at200 ℃.With the temperature increasing to 350 ℃,ZrCoH 3 is dehydrogenated to ZrCo,and then ZrCo further reacts with ZrH 2 at 650 ℃ to reform Zr 2 Co and hydrogen.Among the staged phase transition pathways during dehydrogenation,the decomposition of Zr 2 CoH 5 occurs preferentially,which is well accordance with both the smallest reaction energy barrier and the maximum reaction spontaneity that are determined respectively from kinetics activation energy and thermodynamics Gibbs free energy.Furthermore,first principles calculation results indicate that the stronger binding of hydrogen in interstitial environments of ZrCoH 3 and ZrH 2 triggers the hydrogen-stabilized phase transformation of Zr 2 CoH 5 .The unique phase transition mechanisms in Zr 2 Co-H system can shed light on the further exploration and regulation of analogous staged phase transition of hydrogen storage materials.

Deposition Of Zrc-Coated Particle For Htr With Zrcl4 Powder

Preparation of ZrC Layer of Coated Fuel Particle for High-Temperature Gas-Cooled Reactor by Chemical Vapor Deposition with ZrCl4 Vapor

Preparation of ZrC Coating in TRISO Fuel Particles by Precise Transportation of Solid Precursor and Its Microstructure Evolution

Simulative Calculation of Chemical Vapor Depositing ZrC Coating on Coated Fuel Particles

Thermodynamic Analysis of Chemical Vapor Deposition Process for ZrC Coating

Preparation and Characterization of Zirconium Carbide Coating on Coated Fuel Particles

The Research Progress of Zrc Coating Layer of Fuel Particles for Htgr at Home and Abroad

SiC Coating on HTR Graphite Spheres Prepared by Fluidized-Bed Chemical Vapor Deposition

Deep Insight of Unique Phase Transition Behaviors and Mechanism in Zr 2 Co-H Isotope System with Ultra-Low Equilibrium Pressure

Effects of Stoichiometry and High-Temperature Annealing on Zirconium Carbide Coating Layer in TRISO Particles

Vapor Pressure and Thermochemical Properties of ZrCl4 for ZrC Coating of Coated Fuel Particles

Preparation of Silicon Carbide Coating Layer by Fluidized Bed Chemical Vapor Deposition Using a Halogen-Free Precursor

A Transportation Equipment of Zirconium Source for ZrCl4 Vapor Method Depositing ZrC Coatings

Microstructure Analysis of Zirconium Carbide Layer on Pyrocarbon-Coated Particles Prepared by Zirconium Chloride Vapor Method

Properties of SiC Coated Layer for HTGR Fuel Particles

Synthesis of In Situ ZrB2-SiC-ZrC Coating on ZrC-SiC Substrate by Reactive Plasma Spraying

Design and preparation of SiC based novel coated fuel particle

Influences of deposition temperature, gas flow rate and ZrC content on the microstructure and anti-ablation performance of CVD-HfC-ZrC coating

Preparation of the Coated Nuclear Fuel Particle Using the Fluidized Bed-chemical Vapor Deposition (FB-CVD) Method

Research on Microstructure and Oxidation Resistant Property of ZrSi2-SiC/SiC Coating on HTR Graphite Spheres

Study of SiC layer with fine grains in HTGR coated fuel particles