Abstract:The use of zirconium carbide (ZrC) as a substitute for silicon carbide (SiC) has been proposed to improve the performance of coated particles for high‐temperature gas‐cooled reactor (HTGR) fuel. Irradiation test on ZrC has proved that it has excellent characteristics for HTGR fuel compared with SiC, such as fission product retention capabilities and better resistance on fission product corrosion. Neutronic analysis on 30 MWt HTGR using ZrC and SiC has been performed in many previous studies. The research presented in this paper was conducted as a further continuation of the aforementioned studies. The present study was directed to analyze tristructural isotropic (TRISO)‐coated particles with ZrC as a substitute for the SiC layer on an HTGR with different power rates. Here, we used high‐temperature test reactor design, an experimental scale prismatic HTGR built and operated in Japan. The power was varied at the range of 50‐100 MWt, while the reactor geometry was modified by applying an additional fuel layer in the axial and radial directions. Neutronic analysis of the reactor was investigated by calculating the k‐eff, k‐inf, power peaking factor, burn‐up level, neutron spectrum, and Doppler effect using ZrC and SiC layers for TRISO‐coated fuel particles. The result shows the coated fuel particle using the ZrC layer has the same performance as SiC with an insignificant difference in the values on neutronic aspects calculation. Neutronic calculations are performed using the SRAC code with the Japanese Evaluated Nuclear Data Library 4.0 nuclear data library. This study shows that the usage of ZrC for SiC replacement in HTGR fuel gives almost comparable neutronic performance in 50 and 100 MWt small long‐life prismatic HTGR. With its better characteristics in irradiation and FP retention capability, the ZrC is an excellent choice for future modular HTGR.

The Research Progress of Zrc Coating Layer of Fuel Particles for Htgr at Home and Abroad

Deposition Of Zrc-Coated Particle For Htr With Zrcl4 Powder

Study of SiC layer with fine grains in HTGR coated fuel particles

Preparation of ZrC Coating in TRISO Fuel Particles by Precise Transportation of Solid Precursor and Its Microstructure Evolution

Simulative Calculation of Chemical Vapor Depositing ZrC Coating on Coated Fuel Particles

Comparison of neutronic aspects in high‐temperature gas‐cooled reactor using ZrC and SiC Triso particle with 50 and 100 MWt power

Properties of SiC Coated Layer for HTGR Fuel Particles

Preparation of ZrC Layer of Coated Fuel Particle for High-Temperature Gas-Cooled Reactor by Chemical Vapor Deposition with ZrCl4 Vapor

Preparation and Characterization of Zirconium Carbide Coating on Coated Fuel Particles

Design and preparation of SiC based novel coated fuel particle

Thermodynamic Analysis of Chemical Vapor Deposition Process for ZrC Coating

Effects of Stoichiometry and High-Temperature Annealing on Zirconium Carbide Coating Layer in TRISO Particles

Preparation and Characterization of SiC Layer of Coated Fuel Particles for High-Temperature Gas-Cooled Reactor

Research on Microstructure and Oxidation Resistant Property of ZrSi2-SiC/SiC Coating on HTR Graphite Spheres

SiC Coatings Fabricated by Chemical Vapor Reaction on Graphite

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

A New Design of Composite Fuel with Zr-coated TRISO Particles Dispersed in Metal Matrix

An Improved Design of TRISO Particle with Porous SiC Inner Layer by Fluidized Bed-Chemical Vapor Deposition

Preparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide As Coating Layers

SiC Coating on HTR Graphite Spheres Prepared by Fluidized-Bed Chemical Vapor Deposition

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor