Abstract:Silicon carbide(SiC)is an important material for shielding nuclear fission products in tri-structural isotropic(TRISO)particles for high-temperature gas-cooled reactors.It has an important influence on the safety performance of TRISO particles.Therefore,it is necessary to study the irradiation behaviors and mechanical properties of the SiC layer of TRISO particles.The irradiation process and nanoindentation process can be described accurately by molecular dynamics simulations.It is helpful to analyze the irradiation behavior and mechanical properties of materials.In this paper,molecular dynamics simulations were used to study the irradiation behavior of equiaxed polycrys-talline and long-axis polycrystalline SiC layers obtained from experiments.The calculat-ed theoretical values of the irradiation swelling degree and mechanical properties of the SiC layer are in good agreement with the experimental values.It shows the strong appli-cability of the potential functions and other simulation system parameters used in this paper.The irradiation behavior of the SiC layer was studied in detail by swelling degree,density,atomic structure type,and point defect evolution.The results show that the grain structure of the SiC layer has no significant effect on its irradiation swelling and amorphization.The amorphization is not directly converted from the crystal structure to the amorphous structure during the irradiation process.The crystal structure is conver-ted into an intermediate state structure and then converted into an amorphous structure.The point defects are mainly C vacancies,Si interstitial atoms,and C antisite atoms in the early stage of irradiation.The difference between the ratio of C point defects and Si point defects gradually disappears after the irradiation dose tends to be saturated.The evolution of amorphization and point defects tends to start nearby the grain boundaries.Irradiation reduces the mechanical properties of SiC layers.It no longer has a significant effect on the mechanical properties of the SiC layer after the irradiation dose tends to be saturated.The changes in the mechanical properties of the SiC layer before and after irradiation were analyzed by load-depth curve and stress & strain.The results show that the decrease in mechanical properties of the SiC layer is closely related to the mechanical behaviors under external force.For example,the bearing capacity and plastic deforma-tion degree decrease,and the stress & strain distribution are disordered.The results provide a quantitative explanation for the irradiation behavior of the SiC layer of TRISO particles and the change of mechanical properties under irradiation.It is helpful to understand the irradiation behavior and relationship between the irradiation behavior and mechanical properties of the SiC layer.

Handbook of SiC properties for fuel performance modeling

Multidimensional Multiphysics Modeling of TRISO Particle Fuel with SiC/ZrC Coating Using Modified Fission Gas Release Model

Irradiation-Thermal-Mechanical Coupling Behaviors of a Typical TRISO/SiC Fuel Element Based on Actual Distribution

The Study of Irradiation-Induced Failure Behavior for the TRISO-coated Fuel Particle in HTGR

Design and preparation of SiC based novel coated fuel particle

Molecular Dynamics Simulation of Irradiation Behaviors and Mechanical Properties of SiC Layer of TRISO Particles

Phase Field Modeling of Irradiation-induced Shrinkage Fracture in TRISO Fuel Particle

Study of SiC layer with fine grains in HTGR coated fuel particles

Multiphysics Fuel Performance Modeling of Dispersed TRISO-coated Particle Fuel Plate under Long-Time Normal Condition and Accident Conditions

Preparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide As Coating Layers

Fuel Performance Optimization of U3Si2-SiC Design During Normal, Power Ramp and RIA Conditions

Ultra-high temperature microstructural changes of SiC layers in TRISO particles

Modification in the Stress Calculation of PyC Material Properties in TRISO Fuel Particles under Irradiation

Comparison of neutronic aspects in high‐temperature gas‐cooled reactor using ZrC and SiC Triso particle with 50 and 100 MWt power

An Innovative Fuel Design for HTGRs: Evaluating a 10-Hour High-Temperature Oxidation of the SiC Fuel Matrix During Air Ingress Accident Conditions

High Temperature Oxidation Behavior of SiC Coating in TRISO Coated Particles

Preparation and Characterization of SiC Layer of Coated Fuel Particles for High-Temperature Gas-Cooled Reactor

Multiphysics Modeling of Uo2-Sic Composite Fuel Performance with Enhanced Thermal and Mechanical Properties

Preliminary Numerical Investigation of TRISO-matrix Interface Debonding Characteristics in Fully Ceramic Microencapsulated Fuel

Corrosion of SiC layers on coated zirconia particles in wet atmosphere

Probabilistic View of SiC/SiC Composite Cladding Failure Based on Full Core Thermo-Mechanical Response