Abstract:By solving the problem of very long test time on reliability qualification for Light-emitting Diode (LED) products, the accelerated degradation test with a thermal overstress at a proper range is regarded as a promising and effective approach. For a comprehensive survey of the application of step-stress accelerated degradation test (SSADT) in LEDs, the thermal, photometric, and colorimetric properties of two types of LED chip scale packages (CSPs), i.e., 4000 °K and 5000 °K samples each of which was driven by two different levels of currents (i.e., 120 mA and 350 mA, respectively), were investigated under an increasing temperature from 55 °C to 150 °C and a systemic study of driving current effect on the SSADT results were also reported in this paper. During SSADT, junction temperatures of the test samples have a positive relationship with their driving currents. However, the temperature-voltage curve, which represents the thermal resistance property of the test samples, does not show significant variance as long as the driving current is no more than the sample's rated current. But when the test sample is tested under an overdrive current, its temperature-voltage curve is observed as obviously shifted to the left when compared to that before SSADT. Similar overdrive current affected the degradation scenario is also found in the attenuation of Spectral Power Distributions (SPDs) of the test samples. As used in the reliability qualification, SSADT provides explicit scenes on color shift and correlated color temperature (CCT) depreciation of the test samples, but not on lumen maintenance depreciation. It is also proved that the varying rates of the color shift and CCT depreciation failures can be effectively accelerated with an increase of the driving current, for instance, from 120 mA to 350 mA. For these reasons, SSADT is considered as a suitable accelerated test method for qualifying these two failure modes of LED CSPs.

Reliability Assessment of Solid State Lasers Based on Step Stress Accelerated Degradation Test

Reliability-Based Usage Strategy Optimization For Lifetime Maximization Of Solid-State Lasers

Constant Stress Adt For Superluminescent Diode And Statistical Analysis

Processes of the Reliability and Degradation Mechanism of High-Power Semiconductor Lasers

Investigation of Step-Stress Accelerated Degradation Test Strategy for Ultraviolet Light Emitting Diodes

Lifetest System for Assessing Reliability of High-Power Semiconductor Laser Diodes

Selection of a Laser Reliability Assurance Strategy for a Long-Life Application

Nonlinear Step-Stress Accelerated Degradation Modelling Considering Three Sources of Variability.

CONSTANT STRESS ADT FOR SUPERLUMINESCENT DIODE AND PARAMETER SENSITIVITY ANALYSIS

Constant stress adt for superluminescent diode and parameter sensitivity analysis | przyspieszone badania degradacji przy stałym napre{ogonek}żeniu w analizie diod superelektroluminescencyjnych i wrażliwości parametrycznej

Reliability assessment of LED luminaires based on step-stress accelerated degradation test

Optimal design for step-stress accelerated degradation testing with competing failure modes

Study on the Reliability of Application-Specific LED Package by Thermal Shock Testing, Failure Analysis, and Fluid–Solid Coupling Thermo-Mechanical Simulation

Reliability assessment for LED luminaires based on Step-Stress Accelerated Life Test

Semiparametric evaluation of first‐passage distribution for step‐stress accelerated degradation tests

Application of Reliability Growth Model in Step-Down Stress Accelerated Storage Test

SLD Constant-Stress ADT Data Analysis Based on Time Series Method

Lumen degradation modeling of white-light LEDs in step stress accelerated degradation test

Reliability of the High Power Laser Diodes

Photometric and Colorimetric Assessment of LED Chip Scale Packages by Using a Step-Stress Accelerated Degradation Test (SSADT) Method

Planning of step-stress accelerated degradation test based on non-stationary gamma process with random effects