Abstract:Herein, a highly sensitive electrochemical immunosensor was presented for the cardiac troponin I (cTnI) determination using a multifunctional covalent organic framework-based nanocomposite (HRP-Ab2-Au-COF) as the signal amplification probe. The spherical COF with a large surface area was synthesized in a short time by a simple solution-based method at room temperature. The good biocompatibility, low toxicity, and high stability in water of the COF guarantee its application in biosensing. Besides, its high porosity makes it an excellent carrier for loading abundant horseradish peroxidase (HRP). The modified gold nanoparticles on the surface of COF not only provide a load platform for secondary antibody (Ab2) but also improve the conductivity of COF. Under the synergistic effect of the hydrogen peroxide (H2O2) and HRP, hydroquinone (HQ) in the solution is catalytically oxidized to benzoquinone (BQ), which is then reduced on the electrode surface to generate the electrochemical signal. The designed probes not only show the specific recognition behavior of Ab2 to cTnI but also improve the sensitivity of the biosensing system due to the signal amplification caused by the excellent enzyme catalytic performance of HRP. Based on the H2O2-HRP-HQ signal amplification system, the biosensor for cTnI was fabricated and exhibited a linear response as a function of logarithmic cTnI concentration ranging from 5 pg/mL to 10 ng/mL, and the detection limit was 1.7 pg/mL. Moreover, the biosensor exhibited excellent recovery and reproducibility in the actual sample testing. This work provided a simple approach to determine cTnI quantitatively in practical samples and broadened the utilization scope of the COF-based nanocomposite in the electrochemical immunosensor.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.analchem.1c02636.Nitrogen adsorption–desorption isotherms (Figure S1), pore size distribution (Figure S1), and particle size distribution histogram (Figure S3) of the synthesized COF. Zeta potentials and dynamic light scattering measurement results of COF, Au-COF, and HRP-Ab2-Au-COF (Figures S4–S5 and Table S1). Comparison of the analytical performance of the developed electrochemical biosensor with the reported methods (Table S2) and practical application of the proposed biosensor (Table S3) (PDF)This article has not yet been cited by other publications.

Immunoassay for Cardiac Troponin I with Fluorescent Signal Amplification by Hydrolyzed Coumarin Released from a Metal–Organic Framework

Electrochemical Immunosensor for Cardiac Troponin I Detection Based on Covalent Organic Framework and Enzyme-Catalyzed Signal Amplification

Electrochemical/colorimetric dual-mode sensing strategy for cardiac troponin I detection based on zirconium nitride functionalized covalent organic frameworks

A sensitive electrochemical immunosensor based on high-efficiency catalytic cycle amplification strategy for detection of cardiac troponin I

Rational utilization of Fe(III)-2-amino terephthalic acid MOF as a bifunctional nanocarrier of dopamine and aptamer for constructing ultrasensitive sandwich biosensor of cardiac Troponin I

An Electrochemical Immunosensor for Sensitive Detection of Cardiac Troponin I Based on the Amplification Effect of Asymmetric Bowl-Shaped Mesoporous Nanospheres

Robust Luminescent Pyrene-Based Metal-Organic Framework Hydrogel as a pH-Responsive Fluorescence Emitter for Sensitive Immunoassay of Cardiac Troponin I

Electrochemical immunosensor for determination of cardiac troponin I using two-dimensional metal-organic framework/Fe3O4-COOH nanosheet composites loaded with thionine and pCTAB/DES modified electrode

An Electrochemical Sandwich Immunosensor for Cardiac Troponin I by Using Nitrogen/sulfur Co-Doped Graphene Oxide Modified with Au@Ag Nanocubes As Amplifiers

Fouling-Free Electrochemical Strategy based on Vertically-aligned Peptide Layer for Cardiac Troponin I Sensitive Detection in Human Serum

Electrochemical immunosensor based on Au/Co-BDC/MoS2 and DPCN/MoS2 for the detection of cardiac troponin I

Dual-Modular Aptasensor for Detection of Cardiac Troponin I Based on Mesoporous Silica Films by Electrochemiluminescence/Electrochemical Impedance Spectroscopy

Monolithic Integration of Nanorod Arrays on Microfluidic Chips for Fast and Sensitive One-Step Immunoassays

A Signal Amplifying Fluorescent Nanoprobe and Lateral Flow Assay for Ultrasensitive Detection of Cardiac Biomarker Troponin I

Photoelectrochemical immunoassay of cardiac troponin I based on ZnTCPP/CdIn2S4 type-II heterojunction and co-catalyzed precipitation biolabeling

Label-free electrochemical immunosensor for ultrasensitive determination of cardiac troponin I based on porous fluffy-like AuPtPd trimetallic alloyed nanodendrites

One-Step Digital Immunoassay for Rapid and Sensitive Detection of Cardiac Troponin I.

Copper(II)-Tannic Acid@Cu with In Situ Grown Gold Nanoparticles as a Bifunctional Matrix for Facile Construction of Label-Free and Ultrasensitive Electrochemical cTnI Immunosensor

Impregnation of two-dimensional manganese dioxide nanosheets with 5-carboxyfluorescein as an immunoassay platform for sensitive detection of cardiac troponin T

Flower-Shaped Magnetic Fluorescent Nanoparticles Based Lateral Flow Biosensor for Highly Sensitive Detection of Cardiac Troponin I

Rapid and Sensitive Detection of Cardiac Troponin I for Point-of-Care Tests Based on Red Fluorescent Microspheres