Abstract:Herein, a highly sensitive electrochemical immunosensor was presented for the cardiac troponin I (cTnI) determination using a multifunctional covalent organic framework-based nanocomposite (HRP-Ab2-Au-COF) as the signal amplification probe. The spherical COF with a large surface area was synthesized in a short time by a simple solution-based method at room temperature. The good biocompatibility, low toxicity, and high stability in water of the COF guarantee its application in biosensing. Besides, its high porosity makes it an excellent carrier for loading abundant horseradish peroxidase (HRP). The modified gold nanoparticles on the surface of COF not only provide a load platform for secondary antibody (Ab2) but also improve the conductivity of COF. Under the synergistic effect of the hydrogen peroxide (H2O2) and HRP, hydroquinone (HQ) in the solution is catalytically oxidized to benzoquinone (BQ), which is then reduced on the electrode surface to generate the electrochemical signal. The designed probes not only show the specific recognition behavior of Ab2 to cTnI but also improve the sensitivity of the biosensing system due to the signal amplification caused by the excellent enzyme catalytic performance of HRP. Based on the H2O2-HRP-HQ signal amplification system, the biosensor for cTnI was fabricated and exhibited a linear response as a function of logarithmic cTnI concentration ranging from 5 pg/mL to 10 ng/mL, and the detection limit was 1.7 pg/mL. Moreover, the biosensor exhibited excellent recovery and reproducibility in the actual sample testing. This work provided a simple approach to determine cTnI quantitatively in practical samples and broadened the utilization scope of the COF-based nanocomposite in the electrochemical immunosensor.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.analchem.1c02636.Nitrogen adsorption–desorption isotherms (Figure S1), pore size distribution (Figure S1), and particle size distribution histogram (Figure S3) of the synthesized COF. Zeta potentials and dynamic light scattering measurement results of COF, Au-COF, and HRP-Ab2-Au-COF (Figures S4–S5 and Table S1). Comparison of the analytical performance of the developed electrochemical biosensor with the reported methods (Table S2) and practical application of the proposed biosensor (Table S3) (PDF)This article has not yet been cited by other publications.

Label-Free Electrochemical Immunosensor Based on a Functionalized Ionic Liquid and Helical Carbon Nanotubes for the Determination of Cardiac Troponin I

3d Hierarchical Nanoarchitecture Aunps/Mxene@Pamam Based Biosensor For Ctnt Detection In Human Serum

Label-free electrochemical immunosensor for ultrasensitive determination of cardiac troponin I based on porous fluffy-like AuPtPd trimetallic alloyed nanodendrites

An Electrochemical Immunosensor for Sensitive Detection of Cardiac Troponin I Based on the Amplification Effect of Asymmetric Bowl-Shaped Mesoporous Nanospheres

Electrochemiluminescence Detection of Cardiac Troponin I Based on Au–Ag Alloy Nanourchins

A sensitive electrochemical immunosensor based on high-efficiency catalytic cycle amplification strategy for detection of cardiac troponin I

A Label-Free Electrochemical Aptamer Sensor for Sensitive Detection of Cardiac Troponin I Based on AuNPs/PB/PS/GCE

Electrochemical immunosensor for determination of cardiac troponin I using two-dimensional metal-organic framework/Fe3O4-COOH nanosheet composites loaded with thionine and pCTAB/DES modified electrode

Electrochemical immunosensor based on Au/Co-BDC/MoS2 and DPCN/MoS2 for the detection of cardiac troponin I

Electrochemical Immunosensor for Cardiac Troponin I Detection Based on Covalent Organic Framework and Enzyme-Catalyzed Signal Amplification

A Novel Graphene-Based Nanomaterial Modified Electrochemical Sensor for the Detection of Cardiac Troponin I

Functionalized SnO₂ nanobelt field-effect transistor sensors for label-free detection of cardiac troponin

Sandwich-type Electrochemical Aptasensor Based on Au-modified Conductive Octahedral Carbon Architecture and Snowflake-Like PtCuNi for the Sensitive Detection of Cardiac Troponin I.

An Electrochemical Metallic Nanowire Aptasensor for Rapid and Ultrasensitive Detection of Cardiac Troponin I

Copper(II)-Tannic Acid@Cu with In Situ Grown Gold Nanoparticles as a Bifunctional Matrix for Facile Construction of Label-Free and Ultrasensitive Electrochemical cTnI Immunosensor

Electrochemical/colorimetric dual-mode sensing strategy for cardiac troponin I detection based on zirconium nitride functionalized covalent organic frameworks

An Electrochemical Sandwich Immunosensor for Cardiac Troponin I by Using Nitrogen/sulfur Co-Doped Graphene Oxide Modified with Au@Ag Nanocubes As Amplifiers

Label-free immunosensor for cardiac troponin I detection based on aggregation-induced electrochemiluminescence of a distyrylarylene derivative

An ultrasensitive unlabeled electrochemical immunosensor for the detection of cardiac troponin I based on Pt/Au-B,S,N-rGO as the signal amplification platform

Immunoassay for Cardiac Troponin I with Fluorescent Signal Amplification by Hydrolyzed Coumarin Released from a Metal–Organic Framework

Ultrasensitive Multianalyte Electrochemical Immunoassay Based on Metal Ion Functionalized Titanium Phosphate Nanospheres.