Abstract:Herein, a highly sensitive electrochemical immunosensor was presented for the cardiac troponin I (cTnI) determination using a multifunctional covalent organic framework-based nanocomposite (HRP-Ab2-Au-COF) as the signal amplification probe. The spherical COF with a large surface area was synthesized in a short time by a simple solution-based method at room temperature. The good biocompatibility, low toxicity, and high stability in water of the COF guarantee its application in biosensing. Besides, its high porosity makes it an excellent carrier for loading abundant horseradish peroxidase (HRP). The modified gold nanoparticles on the surface of COF not only provide a load platform for secondary antibody (Ab2) but also improve the conductivity of COF. Under the synergistic effect of the hydrogen peroxide (H2O2) and HRP, hydroquinone (HQ) in the solution is catalytically oxidized to benzoquinone (BQ), which is then reduced on the electrode surface to generate the electrochemical signal. The designed probes not only show the specific recognition behavior of Ab2 to cTnI but also improve the sensitivity of the biosensing system due to the signal amplification caused by the excellent enzyme catalytic performance of HRP. Based on the H2O2-HRP-HQ signal amplification system, the biosensor for cTnI was fabricated and exhibited a linear response as a function of logarithmic cTnI concentration ranging from 5 pg/mL to 10 ng/mL, and the detection limit was 1.7 pg/mL. Moreover, the biosensor exhibited excellent recovery and reproducibility in the actual sample testing. This work provided a simple approach to determine cTnI quantitatively in practical samples and broadened the utilization scope of the COF-based nanocomposite in the electrochemical immunosensor.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.analchem.1c02636.Nitrogen adsorption–desorption isotherms (Figure S1), pore size distribution (Figure S1), and particle size distribution histogram (Figure S3) of the synthesized COF. Zeta potentials and dynamic light scattering measurement results of COF, Au-COF, and HRP-Ab2-Au-COF (Figures S4–S5 and Table S1). Comparison of the analytical performance of the developed electrochemical biosensor with the reported methods (Table S2) and practical application of the proposed biosensor (Table S3) (PDF)This article has not yet been cited by other publications.

Electrochemical Immunosensor for Cardiac Troponin I Detection Based on Covalent Organic Framework and Enzyme-Catalyzed Signal Amplification

Electrochemical/colorimetric dual-mode sensing strategy for cardiac troponin I detection based on zirconium nitride functionalized covalent organic frameworks

3d Hierarchical Nanoarchitecture Aunps/Mxene@Pamam Based Biosensor For Ctnt Detection In Human Serum

Immunoassay for Cardiac Troponin I with Fluorescent Signal Amplification by Hydrolyzed Coumarin Released from a Metal–Organic Framework

Covalently Grafting First-Generation PAMAM Dendrimers Onto MXenes with Self-Adsorbed AuNPs for Use As a Functional Nanoplatform for Highly Sensitive Electrochemical Biosensing of Ctnt

A sensitive electrochemical immunosensor based on high-efficiency catalytic cycle amplification strategy for detection of cardiac troponin I

An Electrochemical Immunosensor for Sensitive Detection of Cardiac Troponin I Based on the Amplification Effect of Asymmetric Bowl-Shaped Mesoporous Nanospheres

Electrochemical immunosensor based on Au/Co-BDC/MoS2 and DPCN/MoS2 for the detection of cardiac troponin I

Electrochemical immunosensor for determination of cardiac troponin I using two-dimensional metal-organic framework/Fe3O4-COOH nanosheet composites loaded with thionine and pCTAB/DES modified electrode

Development of an aptasensor for highly sensitive detection of cardiac troponin I using cobalt–nickel metal-organic framework (CoNi-MOF)

Copper(II)-Tannic Acid@Cu with In Situ Grown Gold Nanoparticles as a Bifunctional Matrix for Facile Construction of Label-Free and Ultrasensitive Electrochemical cTnI Immunosensor

Rational utilization of Fe(III)-2-amino terephthalic acid MOF as a bifunctional nanocarrier of dopamine and aptamer for constructing ultrasensitive sandwich biosensor of cardiac Troponin I

Label-free electrochemical immunosensor for ultrasensitive determination of cardiac troponin I based on porous fluffy-like AuPtPd trimetallic alloyed nanodendrites

Dual-Modular Aptasensor for Detection of Cardiac Troponin I Based on Mesoporous Silica Films by Electrochemiluminescence/Electrochemical Impedance Spectroscopy

Label-Free Electrochemical Immunosensor Based on a Functionalized Ionic Liquid and Helical Carbon Nanotubes for the Determination of Cardiac Troponin I

A sensitive electrochemical biosensor based on Pd@PdPtCo mesoporous nanopolyhedras as signal amplifiers for assay of cardiac troponin I

Fouling-Free Electrochemical Strategy based on Vertically-aligned Peptide Layer for Cardiac Troponin I Sensitive Detection in Human Serum

A Label-Free Electrochemical Aptamer Sensor for Sensitive Detection of Cardiac Troponin I Based on AuNPs/PB/PS/GCE

Photoelectrochemical immunoassay of cardiac troponin I based on ZnTCPP/CdIn2S4 type-II heterojunction and co-catalyzed precipitation biolabeling

Ferricyanide-Mediated, Electrocatalytic Mechanism of Electrochemical Aptamer-Based Sensor Supports Ultrasensitive Analysis of Cardiac Troponin I in Clinical Samples

An Electrochemical Metallic Nanowire Aptasensor for Rapid and Ultrasensitive Detection of Cardiac Troponin I