Abstract:We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either ceramic glue or low-temperature melting glass. The fabrication procedure allows the protection of the cleaved optical fiber end faces, which serve as the two mirrors of the FPI, from damage, thus ensuring the high visibility of the FPI sensor. The FPI's complete openness permits the analyte of interest fluids to flow smoothly into the cavity and interact directly with the light, obviating the need for additional assistance. The fabrication experiment demonstrates that the fabrication procedure can readily achieve a visibility of over 20 dB. Refractive index testing indicates that the sensor exhibits a sensitivity of over 1116 nm/RIU within the range of 1.334-1.375. A comparison of temperature investigations indicates that the fully open cavity FPI fabricated by bonding with low-temperature melting glass exhibits relatively lower temperature immunity than that bonded with ceramic glue. Both have a relatively low temperature fluctuation within the temperature range of 40°C-100°C, with less than 3 nm and 4.5 nm in the over 60°C changes, respectively. Our proposed fully open FPI is an economical, robust, and simple-to-fabricate structure with the potential for mass production. This renders it an appealing option for practical optofluidics applications.

Sensitivity Enhancement of a Fiber-Based Interferometric Optofluidic Sensor.

Optofluidic Refractive Index Sensor Based on Partial Reflection

Femtoliter-scale Optical Nanofiber Sensors.

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Simulation of an In-Line Optofluidic Refractive Index Sensor Based on a Seven-Liquid-Core Teflon-Cladding Fiber

Ultrasensitive optofluidic coupled Fabry-Perot capillary sensors

Highly Sensitive Refractive Index Sensor Based on In-Fiber Optofluidic Fabry-Pérot Interferometer

Fiber optic refractive index sensor using optofluidic anti-resonant reflecting guidance

Optical Fiber Refractive Index Sensor with Low Detection Limit and Large Dynamic Range Using a Hybrid Fiber Interferometer

Highly Sensitive Optofluidic Refractive Index Sensor Based on a Seven-Liquid-core Teflon-cladding Fiber

A highly sensitive four-wave mixing-based microstructured fiber refractive index sensor for microfluid sensing applications

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

All In-Fiber Fabry–Pérot Interferometer Sensor Towards Refractive Index and Temperature Simultaneous Sensing

Optofluidic In-Fiber Interferometer Based on Hollow Optical Fiber with Two Cores

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

Birefringence Induced Vernier Effect in Optical Fiber Modal Interferometers for Enhanced Sensing

Microfluidic Refractive Index Sensor Based on an All-Silica In-Line Fabry-Perot Interferometer Fabricated with Microstructured Fibers.

In-Fiber Integrated Optofluidic Sensors

Open-Cavity Fabry-Perot Interferometer Based on Etched Side-Hole Fiber for Microfluidic Sensing

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer

Liquid Refractive Index Sensors Using Resonant Optical Tunneling Effect for Ultra-High Sensitivity