Abstract:The present study proposes and experimentally verifies a refractive index (RI) sensor with high sensitivity and simple structure based on multimode Mach-Zehnder interference (MZI), in which a suspend-core fiber (SCF) fused with single-mode fibers (SMFs) at both ends worked as the sensing unit. Femtosecond laser is used to process SCF, forming microfluidic channels for liquid in and out, and then encapsulation is conducted to enhance mechanical characteristics of the MZI sensor. By analyzing simulation and experimental results, it has been confirmed that the multimode MZI arises from the effective RI difference between the fundamental mode and the higher-order modes of the SCF core induced by RI variations of external environment. This study involves the preparation and testing of three sensors with varying SCF lengths. As the external RI varies in range of 1.3333 to 1.3472, all sensors exhibit sensitivities at a comparable level. This observation aligns well with the theoretical analysis, indicating that fiber length does not have direct impact on the sensing performance. The maximum sensitivity was 1825.41 nm/RIU. The three sensors undergo tests to assess their repeatability and stability, revealing a maximum wavelength error of 0.1975 nm for repeatability and 0.18 nm for stability. In addition, the temperature sensitivity within the range of 20-100 °C is found to be as low as 0.00667 nm/°C, indicating that the potential impact of temperature-induced wavelength shift can be disregarded. The sensor exhibits high sensitivity, excellent repeatability and stability, promising extensive application in diverse fields including biology, chemistry, medicine, and environmental monitoring.

Ultrasensitive optofluidic coupled Fabry-Perot capillary sensors

Optofluidic Refractive Index Sensor Based on Partial Reflection

Ultrasensitive Refractive Index Sensor Based on Enhanced Vernier Effect Through Cascaded Fiber Core-Offset Pairs

Sensitivity Enhancement of a Fiber-Based Interferometric Optofluidic Sensor.

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Hybrid Fabry-Perot Interferometer for Simultaneous Liquid Refractive Index and Temperature Measurement

Real-time and High-Sensitivity Refractive Index Sensing with an Arched Optofluidic Waveguide

Ultrasensitive RI Sensing Based on the Signal-Processing-Assisted Vernier Effect of a Single FFPI

Ultra-high-sensitivity Refractive Index Sensor Based on Dual-Microfiber Coupler Structure with the Vernier Effect.

Ultrasensitive Refractive Index Fiber Sensor Based on High-Order Harmonic Vernier Effect and a Cascaded FPI.

Microfluidic Refractive Index Sensor Based on an All-Silica In-Line Fabry-Perot Interferometer Fabricated with Microstructured Fibers.

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Ultrasensitive Refractive Index Sensor Based on Mach–Zehnder Interferometer and a 40μm Fiber

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

A Simple High-Sensitivity Sensor Based on Multimode Mach-Zehnder Interference for Refractive Index Measurement

Highly Sensitive Refractive Index Sensor Based on In-Fiber Optofluidic Fabry-Pérot Interferometer

Liquid Refractive Index Sensors Using Resonant Optical Tunneling Effect for Ultra-High Sensitivity

In-Line Fabry-Perot Refractive Index Sensor Based on Microcavity

Highly Sensitive and Robust Refractive Index Sensing Using a Microfluidic Chip with Microfiber Probe

Simulation of an In-Line Optofluidic Refractive Index Sensor Based on a Seven-Liquid-Core Teflon-Cladding Fiber

Ultrasensitive and Wide-Measuring-Range Refractive Index Sensor with Optical Path Length-Tunable Vernier Effect