Abstract:We propose and theoretically demonstrate a highly sensitive optofluidic refractive index (RI) sensor based on a spectral filter formed by a segment of liquid-filled seven-hole Teflon-cladding fiber sandwiched by two standard single mode fibers (SMFs). When liquid flows through the air hole channels of the seven-hole Teflon-cladding fiber, it forms a seven-liquid-core fiber (SLCF) and the lightwaves are well guided by the liquid cores owing to total inner reflection. When the input SMF is aligned to the central core of the SLCF, the light excited in the central core will couple to outer cores periodically along the length of the SCLF. At the detection port, the output SMF is also aligned to the central core of the SLCF. Since the coupling coefficient depends on wavelength, the coupling efficiency is also wavelength dependent, leading to a filter spectrum for a given length of the SLCF. The spectral response of the filter to the change in RI of the liquid cores is numerically simulated based on the coupled-mode theory through finite-element method. The dependence of the RI sensitivity on the diameter and pitch of air holes of the SLCF are studied, respectively. Finally, a very high sensitivity of 25,300 nm/RIU for RI around 1.333 is achieved.

Highly Sensitive Refractive Index Sensor Based on In-Fiber Optofluidic Fabry-Pérot Interferometer

Optofluidic Refractive Index Sensor Based on Partial Reflection

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Highly Sensitive Optofluidic Refractive Index Sensor Based on a Seven-Liquid-core Teflon-cladding Fiber

Fiber optic refractive index sensor using optofluidic anti-resonant reflecting guidance

Optical Refractive Index Sensor Based on Microfiber Fabry-Perot Interferometer

Microfluidic Refractive Index Sensor Based on an All-Silica In-Line Fabry-Perot Interferometer Fabricated with Microstructured Fibers.

All-Fiber Fabry–Perot Interferometer for Liquid Refractive Index Measurement

Open-Cavity Fabry-Perot Interferometer Based on Etched Side-Hole Fiber for Microfluidic Sensing

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Simulation of an In-Line Optofluidic Refractive Index Sensor Based on a Seven-Liquid-Core Teflon-Cladding Fiber

Highly Sensitive Refractive Index Optical Fiber Sensors Fabricated by a Femtosecond Laser

A highly sensitive four-wave mixing-based microstructured fiber refractive index sensor for microfluid sensing applications

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip

Fabry-Perot Fiber Tip Sensor Based on an Inner Air-Cavity for Refractive Index Sensing

Temperature-insensitive Refractive Index Sensor Based on an Optical Fiber Extrinsic Fabry–Perot Interferometer Processed by a Femtosecond Laser

Miniaturized Fiber-Optic Fabry-Perot Interferometer for Highly Sensitive Refractive Index Measurement

Highly Sensitive and Robust Refractive Index Sensing Using a Microfluidic Chip with Microfiber Probe

Refractive index measurement using photonic crystal fiber-based Fabry-Perot interferometer.