Abstract:DC superconducting induction heating method can be much more efficient in metal preheating process when billets are made of low-resistivity and non-magnetic materials as compared with the traditional AC induction heating techniques. In a high temperature superconducting ( HTS) induction heating system, the stability of the HTS magnet is crucial to ensure its safe operation. In this paper, a HTS YBCO magnet has been tested under con-duction-cooled circumstances. It is chosen as a stability criterion that whether the temperature rises can tend to be steady within the safety margin. The temperature distributions were evaluated by sensors located at different posi-tions of the magnet. Furthermore, the effects of different current ramp rates on temperature rises were investigated. It is found that for the safe operating current of a conduction-cooled YBCO magnet, the safety factor value usually smaller than that of an immersion cooled HTS magnet. For the operating magnet in this paper, the safety factor can be chosen as 0. 65 . Because the remote terminal of a conduction-cooled magnet has poor ability of heat transmis-sion, it can be helpful to cover the shortage of uneven cooling by adding cooling points and improving heat transfer methods. It is also presented that different current ramp rates have little influence on the final temperature rises within the given range in which the magnet can operate stably. The tested and analyzed results in this paper are of great significance for studies on thermal stability analysis and safe operation of large-scale HTS magnets.

RETRACTED: Development of a Cryogenic Test Bed for High Amperage Critical Current Measurement on High Temperature Superconductor Wire

Development of Testing Device for Critical Current Measurements for HTS/LTS

Development of a Conduction-Cooled HTS SMES

Design for In-Field Critical Current Measurement System With 102 Mm 15 T Background Magnet

Design and Testing of a Gas-Helium Conduction Cooled REBCO Magnet for a 300 kvar HTS Synchronous Condenser Prototype

Thermal analysis of a 3 T cryogen-free superconducting magnet for electromagnetic property measurement system

Development of YBCO Insert for a 25 T All Superconducting Magnet

Variable Temperature Thermal Conductivity and Conductance Measurements Using a Gifford-McMahon Cryocooler

Development of A Zero Boil-Off Helium Cryostat for Superconducting Magnets

A Long-Life, High-Capacity and High-Efficiency Cryogenic System Developed for High-Tc Superconducting Magnet Applications

Development of Conduction-Cooled Superconducting Magnet for Baby Imaging

First-Cut Design of a Benchtop Cryogen-Free 23.5-T/25-mm Magnet for 1-GHz Microcoil NMR

High Temperature Superconducting Magnet for Fast Discharging Experiments

Development of a superconducting undulator cryostat based on the thermosiphon effect

Magnetic Conduction Structure Design and Charging Test of a Linear-Motor Type Flux Pump for Through-Dewar Excitation of High Temperature Superconducting Motors

Experimental research on thermal stability of conduction-cooled YBCO magnet for induction heating

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Quench Analysis and Improvement of a Semi-Open Split NbTi Superconducting Magnet With Large Inductance

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Freeze-fracture replication of junctional complexes in unincubated and incubated chick embryos