Abstract:Long pulse thermography (LPT) and shearography have been developed as primary methods for detecting debonding or delamination defects in composites due to their full-field imaging, non-contact operation, and high detection efficiency. Both methods utilize halogen lamps as the excitation source for thermal loading. However, the defects detected by the two techniques differ due to their distinct inspection mechanisms. In this study, LPT and shearography are employed to evaluate internal damage in various composite structures. The experimental results demonstrate that LPT, when combined with thermal signal processing algorithms, can clearly detect debonding defects in rubber-to-metal bonded plates, whereas excessive adhesive defects can only be identified by shearography. Flat-bottom holes in the CFRP panel can only be detected by LPT, and shearography is particularly effective for detecting composite materials with a metal skin. For the quantitative measurement of defect sizes, the average errors of the rubber-to-metal bonded plate and CFRP panel using LPT are 4.9 % and 2.2 %, respectively, whereas the average errors of the rubber-to-metal bonded plate and aluminum honeycomb panel using shearography are 15.12 % and 95.4 %, respectively. This indicates that LPT is superior to shearography in quantitatively measuring defect sizes. These two nondestructive testing methods, based on different principles, each have their own advantages and disadvantages. Employing a multi-modal inspection method can leverage their complementary advantages, preventing misdetection and leakage of internal defects in composites.

Pulse-heating Infrared Thermography Inspection of Bonding Defects on Carbon Fiber Reinforced Polymer Composites

Applications of Thermography and Ultrasonics for Detection of Debonding in Carbon Fibre Reinforced Composite Panels

Laser Active Thermography for Debonding Detection in FRP Retrofitted Concrete Structures

Nondestructive Debonding Detection of FRP Strengthened Structure Based on Infrared Thermal Imaging with Laser Thermal Excitation

Ultrasonic Testing of Carbon Fiber-Reinforced Polymer Composites

Nondestructive Evaluation of Composite Bonding Structure Used in Electrical Insulation Based on Active Infrared Thermography

Infrared Laser Heating of GFRP Bars and Finite Element Temperature Field Simulation

Non-destructive Inspection of Carbon-Fibre-reinforced Polymers Using Lock-in Thermography

Experimental study on infrared phase-locked thermal imaging inspection of carbon fiber reinforced polymer laminates

Defect size measurement and far distance infrared detection in CFRP-concrete and CFRP-steel systems

Inspection of defects in composite structures using long pulse thermography and shearography

Halogen Optical Referred Pulse-Compression Thermography for Defect Detection of CFRP

Infrared Thermal Wave Quantitative Evaluation for Fiber Reinforced Composites

Debonding Defect Detection by Applying Pulsed, Lock-in and Linear Frequency Modulation Thermal Excitation Methods in the Inspection of Fiber-Reinforced Metal Laminates

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography

Inverse Heat Transfer Approach for Nondestructive Estimation the Size and Depth of Subsurface Defects of CFRP Composite Using Lock-in Thermography

Low-velocity Impact Damage Detection in CFRP Composites by Applying Long Pulsed Thermography Based on Post-Processing Techniques

Nondestructive evaluation of carbon fiber reinforced polymer (CFRP)-steel interfacial debonding using eddy current thermography

Inspection Of Defects In Cfrp-Foam Layered Structure Composite Plates Of Aerospace Materials Using Lock-In Thermography

Joint Scanning Laser Thermography Defect Detection Method for Carbon Fiber Reinforced Polymer

Improved Non-Destructive Testing of Carbon Fiber Reinforced Polymer (CFRP) Composites Using Pulsed Thermograph