Abstract:Lock-in thermography which is an active thermography technique for NDT is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. Phase angle images obtained by superposition of the initial thermal wave and its internal reflection display hidden thermal structures down to a certain depth below surface. Defects are found by comparing the observed features with expected features provided by an intact reference sample. This technique has been widely applied to detect the defection of many materials and structure in aerospace and automotive industry. In this study, the law of sine modulated lamp was used for active heat source into the CFRP plate sample. The theory of thermal wave transmission and reflection were studied deeply by finite difference method and thermal-electronic equaling model. The thermal wave image sequences were collected with infrared camera, and the program of IR Lock-in thermography was developed by Visual C++ development platform. So that the phase image was extracted between the reflection thermal wave and reference ones on the surface of sample by means of correlation algorithms or Fourier transform. The experimental results show that the simulation is closed to the experimental ones. The defect character is detected clearly, and the relation between phase and defect depth is obtained by lock-in thermography, this relation can be used to measure the defect depth. Lock-in thermography is an effective tool to detect the Debonding defect of CFRP materials.

Infrared Thermal Wave Quantitative Evaluation for Fiber Reinforced Composites

Nondestructive Evaluation of Composite Bonding Structure Used in Electrical Insulation Based on Active Infrared Thermography

Finite Element Simulation Analysis of Infrared Thermal Wave Detection on Composite Insulators

Carbon fiber composites inspection and defect characterization using active infrared thermography: numerical simulations and experimental results

3D photothermal reconstruction of subsurface defects in notched multidirectional CFRP laminates due to tensile fatigue loading

Development of the infrared thermal wave detection system and experimental study

Time-Frequency Based Thermal Imaging: An Effective Tool for Quantitative Analysis

Nde of Composites Delamination by Infrared Thermography

Experimental study on infrared phase-locked thermal imaging inspection of carbon fiber reinforced polymer laminates

Studies on the Infrared Thermography Technique for Quantitative Nondestructive Evaluation of Surface Crack and Delamination of Multilayer Structures

Detection and identification of delamination defects in CFRP laminates using nonlinear frequency-modulated infrared thermal wave testing technology

Infrared defect recognition technology for composite materials

Analyzing efficiency of optical and THz infrared thermography in nondestructive testing of GFRPs by using the Tanimoto criterion

Comparative Analysis of Single- and Multiple-Frequency Thermal Wave Radar Imaging Inspection of Glass Fiber Reinforced Polymer (GFRP)

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography

Defect Detection Capabilities of Pulse Compression Based Infrared Non-Destructive Testing and Evaluation

Measurement of the Energy Release Rate of Compressive Failure in Composites by Combining Infrared Thermography and Digital Image Correlation

Independent component thermography for non-destructive testing of defects in polymer composites

Quantitative Characterization of Interfacial Defects in Thermal Barrier Coatings by Long Pulse Thermography

Quantitative Test of Delamination Defects in CFRP with Surface Interference by Laser Thermography

Pulsed Infrared Thermography to Inspect the Internal Defects of Composite Insulators