Abstract:This study aims to improve the performance of magnesium phosphate cement-based engineered cementitious composites (MPC-ECC) and establish a systematic design method. The MPC-ECC with ultra-high ductility was prepared with the polyethylene (PE) fibers. The effect of the magnesium oxide to potassium dihydrogen phosphate mass ratio (M/P), quartz sand particle size (Sd), water to solid mass ratio (W/S), sand to binder mass ratio (S/B), fly ash (FA) content and fiber volume fraction (Vf) on the micro-mechanical properties and macro-mechanical properties of MPC-ECC were explored. The macro-mechanical properties of MPC-ECC with different curing temperatures and curing ages were also tested. And the SEM test was carried out to analyze the morphology of the MPC-ECC. The results showed that the ultimate tensile strain of MPC-ECC with optimal proportion can reach 7.1%. Even curing at −10 °C for 7 days, the ultimate tensile strain can reach 5.6%, and the compressive strength can reach nearly 20 MPa. And the microstructure is characterized by a highly dense morphology. Additionally, with the increase of M/P, the compressive strength of MPC-ECC increases, but the ultimate tensile stress decreases. The MPC-ECC with the Sd of 150–180 mesh shows significant strain hardening performance, and its ultimate tensile strain can exceed 5%. The large W/S is helpful to improve strain hardening performance, especially when the S/B is 0.2. In addition, when the FA content is 30% or 40%, the strain hardening performance of MPC-ECC is significant. The quantitative association model between ultimate tensile strain and pseudo strain-hardening indices was established. According to the association model, the design method of MPC-ECC was established, based on which the MPC-ECC with desired ductility can be realized. Meanwhile, the PSH σ and PSH J are recommended to reach 2.15 and 25.1, respectively, at the same time for the MPC-ECC with ultimate tensile strain of above 3%.

Magnesium Oxychloride Cement-Based Strain-Hardening Cementitious Composite: Mechanical Property and Water Resistance

Feasibility Study of Strain Hardening Magnesium Oxychloride Cement-Based Composites

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Strain hardening magnesium-silicate-hydrate composites (SHMSHC) reinforced with short and randomly oriented polyvinyl alcohol microfibers

Research on Deterioration Behavior of Magnesium Oxychloride Cement Under High Humidity and High Temperature

Mechanical Properties and Water Stability of High Ductility Magnesium Phosphate Cement-Based Composites (HDMC)

Magnesium phosphate cement-based engineered cementitious composites with polyethylene fibers: Performance improvement and design method

Experimental Research on Mechanical Properties and Microstructure of Magnesium Phosphate Cement-Based High-Strength Concrete

Preparation and mechanical characterization of multi-functional high-ductility engineered magnesium oxysulfate cement-based composites

Long-term phase composition and microstructure characteristics of phosphoric acid modified magnesium oxychloride cement exposed to natural environment

Development of Reactive MgO Cement-Silica Fume–Based Strain-Hardening Engineered Cementitious Composite

Preparation of Low-Cost Magnesium Oxychloride Cement Using Magnesium Residue Byproducts from the Production of Lithium Carbonate from Salt Lakes

Superhydrophobic magnesium oxychloride cement based composites with integral stability and recyclability

Long-term Properties of Aeolian Sand-magnesium Oxychloride Cement Composites and Its Engineering Application

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Properties and hydration mechanism of foamed magnesium oxysulfate cement under acid modification

A New Magnesium Phosphate Cement Based on Renewable Oyster Shell Powder: Flexural Properties at Different Curing Times

Durability of Magnesium Oxychloride Cement in Application: Phase Composition Transition and Microstructure Characteristics

Study on Deterioration Process of Magnesium Oxychloride Cement under the Environment of Dry-Wet Cycles

Hydration mechanism and mechanical properties of a developed low-carbon and lightweight strain-hardening cementitious composites