Abstract:This study aims to improve the performance of magnesium phosphate cement-based engineered cementitious composites (MPC-ECC) and establish a systematic design method. The MPC-ECC with ultra-high ductility was prepared with the polyethylene (PE) fibers. The effect of the magnesium oxide to potassium dihydrogen phosphate mass ratio (M/P), quartz sand particle size (Sd), water to solid mass ratio (W/S), sand to binder mass ratio (S/B), fly ash (FA) content and fiber volume fraction (Vf) on the micro-mechanical properties and macro-mechanical properties of MPC-ECC were explored. The macro-mechanical properties of MPC-ECC with different curing temperatures and curing ages were also tested. And the SEM test was carried out to analyze the morphology of the MPC-ECC. The results showed that the ultimate tensile strain of MPC-ECC with optimal proportion can reach 7.1%. Even curing at −10 °C for 7 days, the ultimate tensile strain can reach 5.6%, and the compressive strength can reach nearly 20 MPa. And the microstructure is characterized by a highly dense morphology. Additionally, with the increase of M/P, the compressive strength of MPC-ECC increases, but the ultimate tensile stress decreases. The MPC-ECC with the Sd of 150–180 mesh shows significant strain hardening performance, and its ultimate tensile strain can exceed 5%. The large W/S is helpful to improve strain hardening performance, especially when the S/B is 0.2. In addition, when the FA content is 30% or 40%, the strain hardening performance of MPC-ECC is significant. The quantitative association model between ultimate tensile strain and pseudo strain-hardening indices was established. According to the association model, the design method of MPC-ECC was established, based on which the MPC-ECC with desired ductility can be realized. Meanwhile, the PSH σ and PSH J are recommended to reach 2.15 and 25.1, respectively, at the same time for the MPC-ECC with ultimate tensile strain of above 3%.

Development of Reactive MgO Cement-Silica Fume–Based Strain-Hardening Engineered Cementitious Composite

Feasibility Study of Strain Hardening Magnesium Oxychloride Cement-Based Composites

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Preparation and mechanical characterization of multi-functional high-ductility engineered magnesium oxysulfate cement-based composites

High-performance Reactive Magnesium Cement Incorporating Hollow Natural Fiber and Silica Sand

Development of Sustainable Engineered Cementitious Composites by Incorporating Local Recycled Fine Aggregate

Magnesium phosphate cement-based engineered cementitious composites with polyethylene fibers: Performance improvement and design method

Multiscale Investigation on the Performance of Engineered Cementitious Composites Incorporating PE Fiber and Limstone Calcined Clay Cement (LC3)

Development and design of ultra-high ductile magnesium phosphate cement-based composite using fly ash and silica fume

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Effects of flue gas desulfurization gypsum incorporation and curing temperatures on magnesium oxysulfate cement

Engineered cementitious composites using blended limestone calcined clay and fly ash: Mechanical properties and drying shrinkage modeling

Effect of hollow natural fiber (HNF) content on the CO2 diffusion, carbonation, and strength development of reactive magnesium cement (RMC)-based composites

Investigation of the Mechanical Properties of Engineered Cementitious Composites with Low Fiber Content and with Crumb Rubber and High Fly Ash Content

Effect of Steel Fiber on Mechanical Properties and Microstructure of Magnesium Phosphate Cement-Based Concrete Exposed to Water and Sulfate Attack

Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation

Design and Performance of Cost-Effective Green Engineered Cementitious Composites with Low Drying Shrinkage and Self-Healing

Experimental investigation into the self-carbonation mechanism of magnesium oxide carbon sequestration foamed concrete

Effects of fly ash, phosphoric acid, and nano-silica on the properties of magnesium oxychloride cement

Development of sustainable engineered cementitious composite with enhanced compressive performance at elevated temperatures using high volume GGBFS

Experimental Study on Mechanical Properties of a Novel Micro-Steel Fiber Reinforced Magnesium Phosphate Cement-Based Concrete