Abstract:The deterioration process and deterioration mechanism of magnesium oxychloride cement (MOC) in an alkaline environment were studied using a scanning electron microscope (SEM), an X-ray diffractometer (XRD), a Fourier transform infrared spectrometer (FT-IR) and a micro-electro-hydraulic servo pressure testing machine to investigate the effects of soaking time in 10 wt.% NaOH solution on the macro- and micro-morphology, phase composition and compressive strength of MOC samples. The results show that the deterioration of MOC samples under an alkaline environment is mainly caused by the alkaline environment providing more OH- ions, which can react with 5Mg(OH)2·MgCl2·8H2O (P 5) in the sample. The resulting reaction gives rise to a faster decomposition of 5Mg(OH)2·MgCl2·8H2O (P 5) and a substantial reduction in the strength of the sample, and finally leads to a gradual deterioration of MOC samples. Meanwhile, immersion time exhibits a significant effect on MOC samples. The extension of immersion time coincides with more OH- ions entering the sample, and the greater presence of OH ions increases the likelihood that more P 5 will produce a hydrolysis reaction, further resulting in the increased deterioration of the sample. After soaking for 6 h in alkaline media, the main phase composition of the surface layer of an MOC sample changes to MgO and Mg(OH)2, and its microscopic morphology is also dominated by round sheets, giving rise to a sharp decrease in its compressive strength (52.2%). When the immersion time is prolonged to 72 h, OH- ions have already immersed into the inner core of the sample, causing the disappearance of P 5 from the whole sample. At the same time, both the surface and inner core of the sample exhibit a disc-shaped morphology, and chalking phenomena also appear on the surface of the sample. This reduces the compressive strength of the sample to 13.5 MPa, only 20% of its compressive strength in water. The compressive strength of the sample after 120 h of immersion is as low as 8.6 MPa, which is lower than that of the sample dipped in water for 21 days (9.5 MPa). As a result, the MOC samples studied in alkaline environments exhibit a faster deterioration rate, mainly because of a faster hydrolysis reaction by P 5, caused by more OH- ions.

Long-term phase composition and microstructure characteristics of phosphoric acid modified magnesium oxychloride cement exposed to natural environment

Durability of Magnesium Oxychloride Cement in Application: Phase Composition Transition and Microstructure Characteristics

Effect of Phosphoric Acid and Soluble Phosphate on the Properties of Magnesium Oxychloride Cement

Research on Deterioration Behavior of Magnesium Oxychloride Cement Under High Humidity and High Temperature

Study on the Deterioration Mechanism of Magnesium Oxychloride Cement under an Alkaline Environment

Study on Deterioration Process of Magnesium Oxychloride Cement under the Environment of Dry-Wet Cycles

Effects of fly ash, phosphoric acid, and nano-silica on the properties of magnesium oxychloride cement

Long-term Properties of Aeolian Sand-magnesium Oxychloride Cement Composites and Its Engineering Application

Preparation of Low-Cost Magnesium Oxychloride Cement Using Magnesium Residue Byproducts from the Production of Lithium Carbonate from Salt Lakes

Chemical–physical–mechanical Stability of MKG Mortars under Sulfate Attacks

Properties and hydration mechanism of foamed magnesium oxysulfate cement under acid modification

Effect of phytic acid on physiochemical properties of magnesium oxychloride cement as a biomaterial

Inorganic Acid Resistance Performances of Magnesium Phosphate Cement: A Two-Year Observation

Strength and Leaching Characteristics of Magnesium Phosphate Cement-Solidified Zinc- Contaminated Soil under the Effect of Acid Rain

Effect of red mud and phosphate on water resistance and hydration mechanism of magnesium oxychloride cement

Characterization of magnesium-calcium oxysulfate cement prepared by replacing MgSO4 in magnesium oxysulfate cement with untreated desulfurization gypsum

Thermodynamic study on the phase assemblage of MPC exposed to natural and accelerated carbonation conditions

Effects of reactive MgO on durability and microstructure of cement-based materials: Considering carbonation and pH value

Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation

Microstructure of Magnesium Potassium Phosphate Cement

Research on High-Strength and Rapid-Hardening Magnesium Phosphate As a Novel Bonding Material for Limestone Artifacts