Abstract:High voltage power switches are needed for medium-voltage (MV) grid applications such as Solid-state Transformers. The series-connection of low voltage devices is a cost-effective alternative approach to achieve higher blocking voltages. Furthermore, all reported high voltage SiC switches to date are unidirectional voltage blocking devices. Additional devices or power stages such as unfolding bridges are needed for MV AC applications. Combining high blocking voltage and bidirectional operation capability into one single module is, therefore, very attractive for future MV AC applications. This paper proposes a forced-air cooled 15 kV/50 A SiC AC switch based on the series-connection of 1700 V SiC MOSFETs. The AC switch consists of two identical parts connected source-to-source. Each part includes ten 1700 V SiC MOSFETs in series. Each set of ten SiC MOSFETs are driven by a common gate signal. A quantitative switching transient model is developed to expound on how multiple critical factors affect the voltage balancing during the switching transient. A preliminary voltage balancing performance is predicted using the proposed model. A dynamic balancing dV/dt snubber capacitor is then designed to achieve satisfactory voltage balance. A 10.5 kV/30 A double pulse test (DPT) is carried out to verify the feasibility of the designed AC switch and the validity of the proposed switching model. Necessary electrical characteristics of the fabricated 15 kV SiC AC switch are characterized for future applications. Auxiliary gate power supplies with 30 kV galvanic isolation capability are designed to support the intended MV applications. Based on the 15 kV SiC AC switch, a 7.2 kVac/100 kVA series resonant converter is developed and experimentally demonstrated to further verify the feasibility of the proposed device stacking technology.

15 Kv SiC MOSFET: an Enabling Technology for Medium Voltage Solid State Transformers

Medium Voltage Solid State Transformers Based on 15 Kv SiC MOSFET and JBS Diode.

ZVS range extension of 10A 15kV SiC MOSFET based 20kW Dual Active Half Bridge (DHB) DC-DC converter

Soft-switching SiC Power Electronic Conversion for Distributed Energy Resources and Storage Applications

Design and Analysis of a 270kW Five-level DC/DC Converter for Solid State Transformer Using 10kV SiC Power Devices

15-Kv/50-a SiC AC Switch Based on Series Connection of 1.7-Kv MOSFETs

Design of a 10 kV SiC MOSFET-based high-density, high-efficiency, modular medium-voltage power converter

Improved medium voltage AC-DC rectifier based on 10kV SiC MOSFET for Solid State Transformer (SST) application

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

Design and Implementation of a 7.2kv Single Stage AC-AC Solid State Transformer Based on Current Source Series Resonant Converter and 15 Kv SiC MOSFET

A Three-Phase Isolated Building Block for High-Power Medium-Voltage Grid Applications

270 Kva Solid State Transformer Based on 10 Kv SiC Power Devices

7.2-kV Single-Stage Solid-State Transformer Based on the Current-Fed Series Resonant Converter and 15-kV SiC mosfet s

A Highly Efficient Power Block with Series Connection of Power SiC MOSFETs‐design, Characterization and Assessment in MV Converters

Sic Mosfet Zero-Voltage-Switching Svm Controlled Three-Phase Grid Inverter

Extreme High Efficiency Enabled by Silicon Carbide (sic) Power Devices

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

7.2Kv/100kva Solid State Transformer Based on Half Bridge LLC Resonant Converter and 15kv SiC AC Switch

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

Medium-Voltage Solid-State Transformer: Technology for a Smarter and Resilient Grid