Abstract:The ore agglomerations could ameliorate intra-particle pore network, homogenize flow paths, and improve leaching efficiency of heap leaching. This paper innovatively develops a novel ore granulator with adjustable inclined angle and rolling speed. To comprehensively evaluate granulation procedure, the effects of physical (crushed feeds particle size distribution, rolling speed, inclined angle), chemical (binder type, curing time) and biological factors (bacterial concentration) on bonding performance of crushed feeds are analyzed. The objective of this paper is to obtain the optimal granulation conditions by studying the influence of various factors on the bonding ability, strength, and stability of granulated ores, in order to improve the pore structure of the heap leaching system, and increase the leaching rate of the ore. The results show that well-shaped agglomeration (WAs) does improve minerals leaching efficiency, and the uniaxial compressive strength of WAs is positively related to curing time, binder concentration, inclined angle, and rolling speed. The excessive lower or higher rolling speed is not suitable to get a higher extraction rate due to undesirable disintegration or compaction. The higher concentration (0.5–10 %) sulfuric acid solution could obviously increase WAs strength from 32.6 KPa to 48.3 KPa. The organic binders such as polyacrylamide are benefit for powders bonding and increase the compressive strength, but does not good for the desirable leaching reaction rate. The bacterial pre-adding has no significant positive influence on bonding and leaching efficiency. Relied on the 3D response surface, the preferred preparing condition is: 78.9 rpm rolling speed, 30° inclined angle, 7-days curing time and 9.3 % H2SO4 solution. Future studies should focus on exploring the intrinsic correlation between the various factors and evaluating the granulating and leaching effects from the perspective of chemical detection and leaching bacteria.

Solid-liquid chaotic mixing and leaching enhancement performance in phosphoric acid leaching process

Rigid-Flexible Combined Impeller Enhancement in Leaching of Phosphate Rock: a Kinetics Study

Chaotic mixing process of fly ash in acid leaching tank intensified by rigid-flexible impeller

New process for phosphorus removal with the combination of biological medium addition and calcium hydroxyphosphate crystallization

Novel Synergistic Process of Impurities Extraction and Phophogypsum Crystallization Control in Wet-Process Phosphoric Acid

Chaotic mixing performance of high-viscosity fluid synergistically intensified by flexible impeller and floating particles

Leaching behavior and microstructure of phosphorus in converter slag

Highly Efficient Phosphorus Removal by a Novel Prolonged Stirring Pelleting Coagulation for Sludge Water Treatment

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Control Foaming Performance of Phosphate Rocks Used for Wet-Process of Phosphoric Acid Production by Phosphoric Acid

Chaotic mixing and dispersing characteristics of gas-liquid two phases in stirred tank

Solid-liquid mixing performance in a stirred tank with a double punched rigid-flexible impeller coupled with a chaotic motor

Design of Impeller Blades for Intensification of Gas-Liquid Dispersion Process in a Stirred Tank

Energy efficiency analysis for high-viscosity fluid mixing enhanced by flexible impeller

Acid treatment enhances phosphorus release and recovery from waste activated sludge: Performances and related mechanisms

Gas-liquid Mixing Performance, Power Consumption, and Local Void Fraction Distribution in Stirred Tank Reactors with a Rigid-Flexile Impeller

Revealing the hydrodynamic effects on phosphorus recovery as vivianite in stirring and aeration systems through PIV experiments and theoretical calculations

Copper sulfides agglomeration using a novel lab-scale granulator: Integrated evaluation of bonding, leaching and mechanical behavior

Chaotic mixing intensified by rigid flexible coupling impeller

Optimization of stirred reactor in leaching process for extractive hydrometallurgy of vanadium

Leaching process of phosphorus and iron from steelmaking slag into malic acid solution