Abstract:Mixing power were characterized by torque sensor. The largest Lyapunov exponents were computed by Matlab software. The fluid mixing performances were observed by the fluid field's visualization technology. A comprehensive experimental study on the effects of impeller type, the distance between impeller and bottom, the length of flexible wire, and the diameter of flexible wire on the number of mixing efficiency (Ce), and the largest Lyapunov exponents (LEmax) was carried out. Results showed that, single-wire flexible impeller can regulate and control the flow field structure and the way of energy dissipation, and effectively enhance the chaotic mixing. At rotation speed 120 r·min-1, compared with the traditional rigid impeller, Ce was decreased by 87.4％ and LEmax was increased by 53.2％ with single-wire flexible impeller, Ce was decreased by 43.8％ and LEmax was increased by 10.8％ compared with single-wire rigid impeller. In addition, at the same agitation speed, the longer the flexible wire, the more conducive to the chaotic mixing, but its power consumption would also increase obviously. The diameter of flexible wire was measured at 0.8 mm, while Ce was less than the others and LEmax was larger than the others, which indicated that the degree of chaotic mixing was the largest in the case. Increasing the diameter of flexible wire led to the increase of fluid motion irregularity and the degree of chaotic mixing. If the diameter of flexible wire is more than 0.8 mm, the disturbance of flexible wire was reduced, which was close to the traditional rigid impeller, resulting in the decrease of chaotic mixing characteristics. It was not conducive to fluid mixing while the distance between impeller and bottom was too high or too low, the optimal distance between impeller and bottom was at 0.25T (T was used to express the inner diameter of stirred vessel).

Solid-liquid mixing performance in a stirred tank with a double punched rigid-flexible impeller coupled with a chaotic motor

Numerical simulation of solid-liquid suspension in a stirred tank with a dual punched rigid-flexible impeller

Intensification of chaotic mixing in a stirred tank with a punched rigid-flexible impeller and a chaotic motor

Design of impeller blades for efficient homogeneity of solid-liquid suspension in a stirred tank reactor

Chaotic mixing performance in rigid-flexible impeller stirred tank with eccentric air jet

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Numerical Simulation of Solid-Liquid Mixing Characteristics in a Stirred Tank with Fractal Impellers

Mixing enhancement of solid-liquid two-phase by coupling double-layer rigid impeller and non-constant chaotic rotating speed

Chaotic mixing enhanced by punched-flexible impeller in stirred vessel

Numerical investigation on the intensification of coaxial slurry mixing systems

Fluid structure interaction in liquid mixing intensified by flexible rigid impeller

Enhancement of liquid–liquid mixing in a mixer-settler by a double rigid-flexible combination impeller

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

CFD simulation and experimental analysis of solid-liquid mixing characteristics in a stirred tank with a self-similarity impeller

Chaotic mixing performance enhanced by single-wire flexible impeller in stirred vessel

Oil-water biphase chaotic mixing enhanced by punched rigid-flexible combination impeller in mixer-settler

Chaotic mixing intensified by rigid flexible coupling impeller

Intensification of Solid–Liquid Suspension Performance in an Elliptical Uncovered Unbaffled Stirred Tank

Chaotic Mixing Intensification and Flow Field Evolution Mechanism in a Stirred Reactor Using a Dual-Shaft Eccentric Impeller

Chaotic mixing and dispersing characteristics of gas-liquid two phases in stirred tank