Abstract:Mixing power were characterized by torque sensor. The largest Lyapunov exponents were computed by Matlab software. The fluid mixing performances were observed by the fluid field's visualization technology. A comprehensive experimental study on the effects of impeller type, the distance between impeller and bottom, the length of flexible wire, and the diameter of flexible wire on the number of mixing efficiency (Ce), and the largest Lyapunov exponents (LEmax) was carried out. Results showed that, single-wire flexible impeller can regulate and control the flow field structure and the way of energy dissipation, and effectively enhance the chaotic mixing. At rotation speed 120 r·min-1, compared with the traditional rigid impeller, Ce was decreased by 87.4％ and LEmax was increased by 53.2％ with single-wire flexible impeller, Ce was decreased by 43.8％ and LEmax was increased by 10.8％ compared with single-wire rigid impeller. In addition, at the same agitation speed, the longer the flexible wire, the more conducive to the chaotic mixing, but its power consumption would also increase obviously. The diameter of flexible wire was measured at 0.8 mm, while Ce was less than the others and LEmax was larger than the others, which indicated that the degree of chaotic mixing was the largest in the case. Increasing the diameter of flexible wire led to the increase of fluid motion irregularity and the degree of chaotic mixing. If the diameter of flexible wire is more than 0.8 mm, the disturbance of flexible wire was reduced, which was close to the traditional rigid impeller, resulting in the decrease of chaotic mixing characteristics. It was not conducive to fluid mixing while the distance between impeller and bottom was too high or too low, the optimal distance between impeller and bottom was at 0.25T (T was used to express the inner diameter of stirred vessel).

Chaotic mixing enhanced by punched-flexible impeller in stirred vessel

Oil-water biphase chaotic mixing enhanced by punched rigid-flexible combination impeller in mixer-settler

Chaotic mixing performance in rigid-flexible impeller stirred tank with eccentric air jet

Chaotic mixing performance enhanced by single-wire flexible impeller in stirred vessel

Chaotic mixing intensified by rigid flexible coupling impeller

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Intensification of chaotic mixing in a stirred tank with a punched rigid-flexible impeller and a chaotic motor

Chaotic mixing and dispersing characteristics of gas-liquid two phases in stirred tank

Solid-liquid mixing performance in a stirred tank with a double punched rigid-flexible impeller coupled with a chaotic motor

Mixing enhancement of solid-liquid two-phase by coupling double-layer rigid impeller and non-constant chaotic rotating speed

Chaotic mixing performance of high-viscosity fluid synergistically intensified by flexible impeller and floating particles

Chaotic Mixing Intensification and Flow Field Evolution Mechanism in a Stirred Reactor Using a Dual-Shaft Eccentric Impeller

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Flow Regime Identification Using Pressure Fluctuation Signals in an Aerated Vessel Stirred

Investigation of the Intensified Chaotic Mixing and Flow Structures Evolution Mechanism in Stirred Reactor with Torsional Rigid-Flexible Impeller

Theoretical And Experimental Aanalysis Of Chaotic Mixing Efficiency Of Plug Flow In Different Geometry

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Chaotic mixing process of fly ash in acid leaching tank intensified by rigid-flexible impeller

Energy Saving and Noise Reduction of Flow Mixing Performance Intensified by Rigid‐flexible Combination Impeller

Fluid structure interaction in liquid mixing intensified by flexible rigid impeller

Design of Impeller Blades for Intensification of Gas-Liquid Dispersion Process in a Stirred Tank