Abstract:Mixing power were characterized by torque sensor. The largest Lyapunov exponents were computed by Matlab software. The fluid mixing performances were observed by the fluid field's visualization technology. A comprehensive experimental study on the effects of impeller type, the distance between impeller and bottom, the length of flexible wire, and the diameter of flexible wire on the number of mixing efficiency (Ce), and the largest Lyapunov exponents (LEmax) was carried out. Results showed that, single-wire flexible impeller can regulate and control the flow field structure and the way of energy dissipation, and effectively enhance the chaotic mixing. At rotation speed 120 r·min-1, compared with the traditional rigid impeller, Ce was decreased by 87.4％ and LEmax was increased by 53.2％ with single-wire flexible impeller, Ce was decreased by 43.8％ and LEmax was increased by 10.8％ compared with single-wire rigid impeller. In addition, at the same agitation speed, the longer the flexible wire, the more conducive to the chaotic mixing, but its power consumption would also increase obviously. The diameter of flexible wire was measured at 0.8 mm, while Ce was less than the others and LEmax was larger than the others, which indicated that the degree of chaotic mixing was the largest in the case. Increasing the diameter of flexible wire led to the increase of fluid motion irregularity and the degree of chaotic mixing. If the diameter of flexible wire is more than 0.8 mm, the disturbance of flexible wire was reduced, which was close to the traditional rigid impeller, resulting in the decrease of chaotic mixing characteristics. It was not conducive to fluid mixing while the distance between impeller and bottom was too high or too low, the optimal distance between impeller and bottom was at 0.25T (T was used to express the inner diameter of stirred vessel).

Energy Saving and Noise Reduction of Flow Mixing Performance Intensified by Rigid‐flexible Combination Impeller

Fluid structure interaction in liquid mixing intensified by flexible rigid impeller

Flow field structure with rigid flexible impeller and rigid impeller

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Chaotic mixing intensified by rigid flexible coupling impeller

Energy efficiency analysis for high-viscosity fluid mixing enhanced by flexible impeller

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Study on mixing characteristics of viscoplastic fluid in a rigid-flexible impeller stirred tank

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Micromixing Simulation of Novel Large-Double-Blade Impeller

PIV Measurement and CFD Simulation of Liquid-Liquid Mixing in Mixer Settler with Rigid-Flexible Impeller

Chaotic mixing performance in rigid-flexible impeller stirred tank with eccentric air jet

Chaotic Mixing Intensification and Flow Field Evolution Mechanism in a Stirred Reactor Using a Dual-Shaft Eccentric Impeller

Power Consumption and Flow Field Characteristics of a Coaxial Mixer with a Double Inner Impeller

Gas-liquid Mixing Performance, Power Consumption, and Local Void Fraction Distribution in Stirred Tank Reactors with a Rigid-Flexile Impeller

Chaotic mixing performance enhanced by single-wire flexible impeller in stirred vessel

Numerical Simulation of Mixing Process in Pseudoplastic Fluids Agitated by Maxblend Impeller in Stirred with High Ratio of Height to Diameter

Numerical Investigation on Intensified Mixing Performance with Modified Dual Impeller

The Influence of Impeller Combination on the Gas-Liquid Dispersion Performance of a Coaxial Mixer in Viscous Fluids

Chaotic mixing and dispersing characteristics of gas-liquid two phases in stirred tank

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System