Abstract:The natural gas production system is a very complex system, involving pipelines, compressors and valves with different structures and calculation parameters. It can be divided into two different parts: gas production and collection pipe networks. Fluid flow in the gas production pipe network is multi-phase flow. Fluid flow in the gas collection pipe network is single-phase flow. It is imperative to consider gas production and collection pipe networks in conjunction to ensure accurate operation simulation. The complexity of the network structures and flow statuses can cause computational instability or even divergence problems in simulations when coupling these two types of pipe networks. To address this issue, an automatic and practical node numbering method is proposed for the large-scale pipe network, which can ensure the full rank of the solution matrix and computational stability. On the other hand, due to the need for frequent adjustments of the pipe networks to satisfy the production demand, computational boundary treatments of constant inlet/outlet pressure, constant flow rate or constant pressure ratio for the compressor stations are not suitable. To address this issue, the characteristic curves of compressors are coupled into the simulation of pipe networks to represent the variable-speed centrifugal and reciprocating compressors. The accuracy and robustness of the proposed models and numerical methods are validated through comparisons with software results and field data. The simulation time is only within 0.5 s for the natural gas production system with 210 nodes and 176 pipelines. Our model has relative deviations within 3% in both pressure and flow rate compared to field data and within 10% compared to software.

Start-up process of crack gas compressorsvia dynamic simulation

Development and Application of Industrial Catalytic Cracking Process Online Calculation

Optimization of Start-up Process in Combined Cycle Steam Turbine of a Power Plant

Research on the Influence of Crack Parameters on the Vibration Characteristics of Gas Turbine Compressor Blades

Optimization on Start-up Process of Steam Turbine in Combined Cycle Generating Units

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Study on Quick Start-up of Steam Turbine in a Gas-Steam Combined Cycle

Cyclic Scheduling of No Backup Cracking Furnace System Considering Real World Operational Characteristics

Dynamic Simulation of Warm Compressor Station for SHINE Test Facility Cryoplant

Modelling and Analysis of the Start-Up Phase of a Compressed Air Energy Storage System under Variable Operating Conditions

Dynamic Simulation Research of Full Startup Procedure of GE 9FA Heavy-Duty Gas Turbines Using SIMULINK

The Study on Crack Dynamic Propagation in the Rich Gas Transmission Pipelines

Dynamic simulation study of the start-up and shutdown processes for a recompression CO 2 Brayton cycle

Flare Minimization During Start-Ups of an Integrated Cryogenic Separation System Via Dynamic Simulation

Efficient hydraulic and thermal simulation model of the multi-phase natural gas production system with variable speed compressors

Process Simulation and Optimization of Fluid Catalytic Cracking Unit's Rich Gas Compression System and Absorption Stabilization System

Dynamic Simulation of an Oil and Gas Plant Using Aspen-HYSYS®: A Real Start-Up Process

Investigation of Gas Compression Process for Reciprocating Compressor

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Simulation of Dynamic Characteristics of Moving Magnet Linear Compressor for Refrigerator

Fault identification of start-up process based on principal component analysis and wavelet transform