Abstract:We study the instability mechanisms leading to slug flow formation in an inclined pipe subject to gravity forces. We use a phase-field approach, where the Cahn-Hillard model is used to model the interface. At the inlet, a stratified flow is imposed with a specified velocity profile. We validate our numerical results by comparing against previous theoretical models and by predicting the various flow regimes for horizontal and inclined pipes, including stratified flow, slug flow, dispersed bubble flow and annular flow. Subsequently, we focus on slug formation in an inclined pipe and connect its appearance with specific vortical dynamics. A two-dimensional channel geometry is first considered. When the heavy fluid is injected as the top layer, inverted vortex shedding emerges, which periodically impacts on the bottom wall, as it develops further downstream. The accumulation of heavy fluid in the bottom wall causes a back flow that induces rolling waves and interacts with the upstream jet. When the heavy fluid is placed as the bottom layer, the heavy fluid accumulates and initially forms a massive slug at the bottom region, close to the inlet. Subsequently, the heavy fluid slug starts to break into smaller pieces, some of which translate along the pipe. During the accumulation phase, a back flow forms also generating rolling waves. Occasionally, a rolling wave can reach the top of the pipe and form a new slug. To describe the generation of vorticity from the two-phase interface and pipe walls in the slug formation, we study the circulation dynamics and connect it with the resulting two-phase flow patterns. Finally, we conduct three-dimensional (3-D) simulations in a circular pipe and compare the differences between the 3-D flow patterns and its circulation dynamics against the 2-D simulation results.

Investigation of two phase flow instability in a narrow channel

EXPERIMENTAL INVESTIGATION AND FLOW VISUALIZATION OF THE TWO-PHASE FLOW INSTABILITY AT LOW VAPOR QUALITY IN A VERTICAL NARROW CHANNEL

Effects of parameters on the two phase flow instability in a microchannel

Effects of the Outlet Pressure on Two-Phase Slug Flow Distribution Uniformity in a Multi-Branch Microchannel

Hydrodynamic Instability Of Nanofluids In A Channel Flow

Two-Phase Flow Instability of Boiling in A Double Microchannel System at High Heating Powers

Numerical Computations of the Flow in A Finite Diverging Channel

The Analysis of Two-Phase Flow Instability in a Vertical U-tube Evaporator

Modeling and Analysis of Supercritical Flow Instability in Parallel Channels

Study on Application of Two-Fluid Model in Narrow Annular Channel

Numerical Investigation on Two-Phase Flow Heat Transfer Performance and Instability with Discrete Heat Sources in Parallel Channels

A Purely Elastic Instability and Mixing Enhancement in a 3D Curvilinear Channel Flow

Analysis of Error and Stability of Nanofluid over Horizontal Channel with Heat/Mass Transfer and Nonlinear Thermal Conductivity

COMPARISON OF FLOW INSTABILITY CRITERIA AND THRESHOLD CALCULATION METHODS OF DENSITY WAVE OSCILLATIONS IN A VERTICAL BOILING CHANNEL

EXPERIMENT ON TWO-PHASE CRITICAL FLOW THROUGH NARROW CHANNELS

Numerical Analysis of Supercritical Flow Instability in Parallel Dual Channel

Direct numerical simulations of two-phase flow in an inclined pipe

Thermal Relaxation and Critical Instability of Near-Critical Fluid Microchannel Flow.

Experimental study of two-phase parameters of subcooled boiling flow in a single-side heated rectangular channel

Two-phase flow boiling instabilities: A review

Experimental study on turbulent characteristics of dispersed bubbly flow in a narrow rectangular channel by two-phase PIV