Abstract:Mullite fiber-based porous ceramics is one of the most commonly used high-temperature insulation materials. However, how to further reduce the thermal conductivity and improve the strength of such materials has been a challenge in the field of high-temperature insulation. In this paper, mullite micro/nano fiber-based porous ceramic was prepared by introducing mullite nanofibers into mullite microfiber-based porous ceramics and the effect of microfiber/nanofiber weight ratio on the samples properties were characterized and analyzed. Results showed that the compressive strength and high-temperature thermal insulation properties of the porous ceramics increased significantly with an increase in the nanofiber content. For the porous ceramics with similar density (about 0.50Ā g/cm 3 ), the compressive strength of the sample with a microfibers/nanofibers weight ratio of 1:2 was 1.43Ā MPa, which was much higher than that of the porous ceramics prepared with only microfibers (0.26Ā MPa). Meanwhile, the backside thermal equilibrium temperature of the sample with a microfiber/nanofiber weight ratio of 1:2Ā at 900Ā Ā°C environment was 355.8Ā Ā°C, which was much lower than that of the porous ceramic prepared with only microfibers (476.5Ā Ā°C). In addition, in order to investigate the temperature resistance of mullite micro/nano fiber-based porous ceramics, the sintering temperatures was increased from 1400Ā Ā°C to 1500Ā Ā°C. Results shows that the high-temperature thermal insulation performance of mullite micro/nano fiber-based porous ceramics with high mullite nanofiber content decays more seriously. The back-temperature test showed that the thermal equilibrium temperature of the samples with a mullite micron/nanofiber weight ratio of 1:1 in 900Ā Ā°C environment increased rapidly from 386.3Ā Ā°C to 454.2Ā Ā°C when the sintering temperature was increased from 1400Ā Ā°C to 1500Ā Ā°C. The preparation of mullite micro/nanofiber-based porous ceramics provides a new strategy to improve the performance of fiber-based porous ceramics.

Effect of Micro SiC Addition on the Microstructure and Thermal Shock Resistance of 3D Printed Mullite Contained Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

The Effect of SiC Whisker on the Sintering and Thermal Shock Resistance Property of ZrO2-mullite Ceramic

Impact of Sintering Aid Type and Content on the Mechanical Properties of Digital Light Processing 3D-Printed Si3N4 Ceramics

Effect of Sic on Microstructures and Properties of Cordierite-Mullite Multiphase Ceramics Material

The Effect of ZrO2Fiber on the Flexural Toughness and Thermal Shock Resistance of the Mullite-10%vol.SiC Whisker Ceramic

A novel sintering additive system for porous mullite-bonded SiC ceramics: High mechanical performance with controllable pore structure

Dense Mulliteceramic Sintered by SPS and Its Behavior under Thermal Shock

Fabrication of mullite micro/nano fiber-based porous ceramic with excellent mechanical and thermal insulation properties

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Thermal shock behavior of ZrB2–SiC ultra-high temperature ceramics with addition of zirconia

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

Preparation and characteristics of honeycomb mullite ceramics with controllable structure by stereolithography 3D printing and in-situ synthesis

Study on Thermal Shock Resistance and Oxidation Resistance of Ultra-High Temperature Ceramics

Effect of Silicon Addition on Mechanical Properties of Mullite-Sic Composite Refractories

Si3N4 Hollow Microsphere Toughened Porous Ceramics from Direct Coagulation Method Via Dispersant Reaction

High-strength, multifunctional and 3D printable mullite-based porous ceramics with a controllable shell-pore structure

Enhanced Thermal Shock and Oxidation Resistance of Si2BC3N Ceramics Through MWCNTs Incorporation

Fabrication and Thermal Shock Resistance of Multilayer Γ-Y2si2o7 Environmental Barrier Coating on Porous Si3N4 Ceramic

Effect of Urchin-Like Mullite Whiskers on the High-Temperature Performance of Porous SiO<sub>2</sub>-Based Ceramic Molds

Effect of Urchin-Like Mullite Whiskers on the High-Temperature Performance of Porous SiO₂-Based Ceramic Molds.