Abstract:The ceramic core plays an important role in the preparation of aero-engine hollow blades, as it can directly determine the precision and pass rate of the cooling passage in the blade cavity. Sufficient high-temperature bending strength, high open porosity, and low sintering shrinkage are the main requirements for qualified ceramic cores. In order to prepare qualified ceramic cores with complex structures, in-situ mullite-reinforced Al2O3-based ceramic cores were successfully prepared using vat photopolymerization 3D printing technology. The in-situ synthesis of mullite was designed through thermodynamic analysis. The influence mechanisms of the sintering temperature and doping amount of fused silica on the open porosity, sintering shrinkage, and bending strength of the core were systematically investigated. With an increase in the sintering temperature and doping amount of fused silica, the porosity of the in situ mullite-reinforced ceramic core decreased. Sintering shrinkage increased with an increase in the sintering temperature and doping amount of fused silica. The cores containing 20 wt% fused silica showed the smallest sintering shrinkage. The bending strength increased with an increase in the sintering temperature and the doping amount of fused silica. A core doped with 20 wt% fused silica had the highest bending strength at 1773.15 K. Furthermore, 20 wt% fused silica doping, sintered at 1673.15 K, can be used to prepare in-situ mullite enhanced Al2O3-based cores with the best comprehensive properties. This core has a higher open porosity (40%), suitable bending strength of 25 MPa (at 1773.15 K), and lower sintering shrinkage in the Z direction. The significance of this study lies in the regulation of in-situ mullite generation and viscous flow in solid-liquid sintering by adjusting the doping amount of fused silica and the sintering process, and this opens up new pathways by the coordinated regulation of strength, open porosity, and sintering shrinkage of 3D printed ceramic cores.

Additive manufacturing of functional corundum-mullite refractory with acid-corrosion resistance and heat insulating by direct ink writing

Additive manufacturing of novel lightweight insulation refractory with hierarchical pore structures by direct ink writing

Additive manufacturing of SiO2–Al2O3 refractory products via Direct Ink Writing

Additive manufacturing of SiC-Sialon refractory with excellent properties by direct ink writing

Enhancing properties of oriented short carbon fiber-reinforced refractory castables through direct ink writing and in-situ synthesis of whiskers

Versatile Thermal-Solidifying Direct-Write Assembly towards Heat-Resistant 3D-Printed Ceramic Aerogels for Thermal Insulation

Optimization of the sintering thermal treatment and the ceramic ink used in direct ink writing of α-Al2O3: Characterization and catalytic application

Direct ink writing of cordierite ceramics with low thermal expansion coefficient

Direct ink writing additive manufacturing of porous alumina-based ceramic cores modified with nanosized MgO

3D Printing of Hierarchical Porous Ceramics for Thermal Insulation and Evaporative Cooling

High-strength, multifunctional and 3D printable mullite-based porous ceramics with a controllable shell-pore structure

Properties and Structure of Micro Porous Mullite-Corundum Refractory with High Strength

Effect of Micro SiC Addition on the Microstructure and Thermal Shock Resistance of 3D Printed Mullite Contained Ceramics

Enhanced 3D printed Al2O3 core via in-situ mullite

Reinforcement effect in printing precision and sintering performance for liquid crystal display stereolithography additive manufacturing of alumina ceramics

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

Enhancement, application, and challenges of chromium–corundum high‐temperature refractories

Effect of Alumina Addition on the Properties of Corundum-Mullite Ceramic Matrix

Effect of in-situ formation of columnar mullite and pore structure refinement on high temperature properties of corundum casatbles

Enhanced high-temperature dimensional accuracy by fibers in silica ceramic cores prepared through vat photopolymerization 3D printing

Optimization of 3D Printing Parameters for Alumina Ceramic Based on the Orthogonal Test