Abstract:Glass fibers (GFs) are commonly used as reinforcements for advanced polymer composites. To improve the interfacial shear properties and mechanical properties of GF-reinforced composites (GFRPs), carbon nanotubes (CNTs) are directly grafted onto GFs using chemical vapor deposition (CVD). However, this process requires high temperatures, which causes thermal degradation of GFs, deteriorating their mechanical properties. In this study, a low-temperature CNT-grafting process was investigated using a bimetallic catalyst introduced onto a GF fiber surface via precursor solutions. The mechanical properties of the CNT-grafted GFs fabricated at different CVD temperatures were evaluated; they consistently showed low tensile strengths at temperatures above 400 °C. Subsequently, various CNT-grafted GFRPs were manufactured, and their mechanical properties were characterized. Interestingly, the flexural strengths of the composites increased with maintained tensile strength, despite a deterioration of the CNT-grafted GF reinforcements due to the CVD process. This could be attributed to the improved interfacial shear strength (IFSS) of the CNT-grafted GFs at the fiber level, and the enhanced compressive strength and interlaminar shear strength (ILSS) of CNT-grafted GFRPs at the composite level. Considering the properties of GF through CVD processes, particularly in relation to temperature, and factors such as IFSS, ILSS, tensile, compressive and flexural properties of composite materials, grafting CNTs on GF via a CVD system demonstrated its highest optimality at 450 °C.

Carbon nanotube film engineered fiber reinforced polymer composites

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Optimizing the Thermal Properties of Fiber Reinforced Phthalonitrile Composites

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Carbon nanotube-induced localized laser heating toward simultaneously enhanced laydown efficiency and fracture toughness of in-situ consolidated glass fiber thermoplastic composites

Improvement of curing efficiency and heat resistance of CFRP by the growth of SiCNWs on CF

Mechanical properties and structural health monitoring performance of carbon nanotube-modified FRP composites: A review

Ultra-thin carbon fiber reinforced carbon nanotubes modified epoxy composites with superior mechanical and electrical properties for the aerospace field

Consolidation of aerospace-grade high-temperature thermoplastic carbon fiber composites via Nano-engineered electrothermal heating

Carbon nanotube-decorated glass fibre bundles for cure self-monitoring and load self-sensing of FRPs

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

Enhancing the Mechanical Performance of Fiber‐Reinforced Polymer Composites Using Carbon Nanotubes as an Effective Nano‐Phase Reinforcement

Carbon-nanotube-grafted glass-fiber-reinforced composites: Synthesis and mechanical properties

Significantly enhanced laser trapping and heating of carbon nanotube/carbon fibre hierarchical composites for efficient laser-assisted automated fibre placement

Carbon Nanotube Composites Manufactured by Filament Wind Processing for Electrothermal Deicing Application

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

Full on-line preparation of polymer composites reinforced with aligned carbon nanotubes

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

Effect of CNT film interleaves on the flexural properties and strength after impact of CFRP composites