Abstract:Nanomaterials have already been explored their potential for interlaminar toughening and crack-monitoring capabilities within the field of composite materials. However, efficient enhancement of interlaminar fracture toughness remains an unresolved challenge. Herein, a novel integrated filler spray and nanosecond pulsed electric field (nsPEF)-assisted curing technique is proposed for the fabrication of high-performance composite material system for the first time. The spraying technique proves to be an effective approach for depositing fillers, including carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), and carbon nanofibers (CNFs), onto carbon fiber prepreg. Meanwhile, the nsPEF-assisted technique is utilized to enhance the wettability of resin to fiber, thus reducing void defects. The efficacy of this integrated technique is evidenced by the particularly low content of fillers (0.047 wt%). The experimental results show a substantial reduction of porosity in the composite by 49.36% (from 1.56% to 0.79%). Meanwhile, the mode I initiation and steady-state toughness of samples with CNTs and GNPs are remarkably improved by up to 47% and 82%, respectively, compared to the baseline. This represents the most significant improvement reported to date for non-functionalized CNTs and GNPs at such low concentrations. Moreover, the relative electrical resistance variation (Δ R / R 0 %) of CNT/GNP sensors used for in-situ damage sensing increased by ∼ 14%. This work pioneers the investigation of the synergistic effects of two promising techniques for preparing composite materials, offering advantages in terms of simplicity, multifunctionality, and the potential for industrial scalability.

Carbon nanotube-induced localized laser heating toward simultaneously enhanced laydown efficiency and fracture toughness of in-situ consolidated glass fiber thermoplastic composites

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Significantly enhanced laser trapping and heating of carbon nanotube/carbon fibre hierarchical composites for efficient laser-assisted automated fibre placement

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Optical properties optimization of carbon fiber reinforced thermoplastic tapes by micro surface texturing for enhanced laser heating efficiency and in-situ consolidation quality during AFP process

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

The effect of rolling process on the mechanical and electrical properties of CNTs-enhanced GFRP

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films

Effectiveness of short and straight carbon nanotubes on dispersion state and static/dynamic mechanical properties of woven glass fibre-reinforced polymer laminates

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

Synergistic toughening on CFRP via in-depth stitched CNTs

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

An integrated nanofiller spray and nanosecond pulse electrically-assisted method for synergistically interlaminar toughening and in-situ damage monitoring of CFRP composites

Effect of chemically grafted CNTs onto carbon fiber on the mechanical properties of fiber metal laminates

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

In situ consolidation process-based fabrication and interlaminar modification mechanism associated with CF/PEEK multiscale nanocomposites characterized by interlaminar doping of CNTs

Enhanced interlaminar fracture toughness of CF/PEEK laminates by interleaving CNT-decorated PEEK films

Synergistic enhancement effect of flame-grown carbon nanotubes and chopped carbon fibers on adhesive joint of thermosetting laminate

Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects

Effects of carbon nanotube length on interfacial properties of carbon fiber reinforced thermoplastic composites