Abstract:Membrane-based absorption shows numerous potential applications for CO2 capture from flue gas. However, during the process, membrane fouling is not only caused by the wetting but also induced by gaseous components (SOx, NOx, and water vapor) and fine particles in the flue gas. In this work, the synergetic effects of water vapor coupling with SOx and NOx as well as the fine particles were investigated to better understand the membrane fouling and the performance of polypropylene hollow fiber membrane modules for CO2 capture in actual industrial conditions. The CO2 removal efficiency and the mass transfer rate over time were studied under different feed gas flows of various gaseous composition schemes. The membrane performance suffered from a notable decrease after exposure to SO3 and particles, and in a wet gas stream, the effects of SO3 and particles were irreversible, whereas the influence of SO2 and NO2 can be recovered by N-2 sweeping. The characterization results of membrane modules confirm that the membranes are polluted by gaseous and particle impurities to different extents, and after long-term operation in flue gas containing impurities, the morphology of materials changed substantially. The reduction of contact angles illustrated that the hydrophobic property decreases obviously after exposure to SOx Moreover, the results of Energy dispersive spectrometry and Fourier transform infrared spectroscopy indicated that the interaction of stranded SO3 and the membrane formed a new group. During the process of membrane CO2 adsorption from flue gas containing fine particles, the pores of the membrane were blocked by fine particles and the surfaces were covered by a particle layer, which occupies the efficient contact area and leads to an increase of mass-transfer resistance and reduced membrane performance.

Hollow Fiber Membrane Absorption Of Co2 In The Flue Gas

Research Progress in Removal of CO2 from Closed Spaces by Membrane Technology

HOLLOW FIBER MEMBRANE CONTACTOR ABSORPTION OF CO 2 FROM THE FLUE GAS : REVIEW AND PERSPECTIVE

Research progress in hollow fiber membranes for CO2 capture

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

Separation of CO2 in Flue Gas by Membrane Absorption in China

Simulation on the Structure Effects of Hollow Fiber Membrane on CO 2 Removal from Flue Gas

Research on Modern CO2 Absorption Process

Optimization of CO2Absorption Characteristic under the Influence of SO2in Flue Gas by Hollow Fiber Membrane Contactor

Experiment of CO_2 Separation from Flue Gases by Membrane Gas Absorption

Removal of CO2 from Simulated Flue Gas of Power Plants by Membrane-Based Gas Absorption Processes

Numerical Study on Absorption of Carbon Dioxide and Mass Transfer Performance in Hollow Fiber Membrane Contactor

Experiments Study of Absorption Solution Performance of CO2 Sequestration in Flue Gas Using Membrane Absorption

Experimental Comparison of Flue Gas CO_2 Separation with Membrane Absorption and Chemical Absorption

Hollow Fiber Contained Hydrogel-Ca Membrane Contactor for Carbon Dioxide Removal from the Enclosed Spaces

On co 2 absroprtion using absorbent in hollow fiber membrane contactor

Co2 Capture Using Hollow Fiber Membrane Under Wet Ammonia-Based Desulfurization Flue Gas Conditions

Recent Advances in the Research of High-temperature CO2 Adsorbents and Absorbents

Fouling of Impurities in Desulfurized Flue Gas on Hollow Fiber Membrane Absorption for CO2 Capture

Experimental Study on the Separation of CO2 from Flue Gas Using Hollow Fiber Membrane Contactors Without Wetting