Abstract:A differential ring voltage‐controlled oscillator (DRVCO) is proposed as a critical block in communication systems, employing Wu active inductors for the first time to achieve low noise, wide tuning range, and low power consumption. Designed in 180 nm CMOS technology, it operates at 2.745 GHz with a tuning range of 2.15 GHz, consuming 1.99 mW. The phase noise is −91.2 dBc/Hz at 1 MHz offset, with a FoM of −156.9 dBc/Hz, covering 0.00072 mm2. A differential ring voltage‐controlled oscillator (DRVCO) is proposed in this paper as one of the critical blocks in communication systems. It consists of four stages of delay cells connected in a chain, creating a ring structure with auxiliary path interconnections. The oscillation frequency of the DRVCO can be controlled by adjusting the tuning voltage that controls the charging current. To achieve the desired performance for wireless applications, the Wu active inductor, which is a low‐noise and high‐quality factor active inductor, is employed in each delay cell for the first time. Using an active inductor provides a wide tuning range and also allows for proper phase noise and low power consumption. The proposed circuit is designed and simulated using standard 180‐nm CMOS technology with a 1.8‐V voltage source (VDD). The circuit is designed to achieve a tuning range of 2.15 GHz with a center frequency oscillation of 2.745 GHz, over the control voltage variation of 1.4 V (0 to 1.4 V). To achieve the desired performance, the circuit consumes an average power of 1.99 mW. It achieves a phase noise of − 91.2 dBc/Hz at 1 MHz offset frequency, indicating effective noise suppression. The figure of merit (FoM) for the circuit is − 156.9 dBc/Hz, representing its overall performance. The final layout of the circuit estimates an area of 0.00072 mm2. Various analyses, including Monte–Carlo simulations, PVT (process, voltage, temperature) variation analysis, and other relevant analyses, have been performed to ensure the reliable performance of the proposed circuit.

Designs of CMOS Multi-band Voltage Controlled Oscillator Using Active Inductors

A 60GHz voltage-controlled oscillator with a 3.6GHz tuning range in 180nm CMOS technology

A Wideband Voltage-Controlled Oscillator with Gain Linearized Varactor Bank

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

A 0.18um CMOS Using High-Q Active Inductors for Multi-band Low Noise Amplifier

A Cmos Multi-Band Low Noise Amplifier Using High-Q Active Inductors

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

An X-Band Dual-Mode Class-C VCO with a 45.27% Tuning Range in 55-Nm CMOS

A 80.4-to-86.5 GHz E-band QVCO with Inductor Tuning Method and Amplifier Feedback in 65-Nm CMOS Technology

A 12.3–18.5-Ghz Single-Core Oscillator Using a Dual-Mode Variable Inductor with a Tunable Self-Resonant Frequency Technique

A 3 GHz Low Power LC VCO with Voltage Boosted Circuit from 0.5 V Supply

CMOS Voltage-Controlled Oscillator with Complementary and Adaptive Overdrive Voltage Control Structures

A 2.7-Mw 1.36–1.86-Ghz LC-VCO with a FOM of 202 Dbc/hz Enabled by a 26%-Size-reduced Nano-Particle-Magnetic-Enhanced Inductor

A wide tuning range CMOS differential ring VCO using an active inductor for wireless applications

A 1.8-V 2.4/5.15-Ghz Dual-Band LCVCO in 0.18-/Spl Mu/m CMOS Technology

A 5-8 GHz Wideband and Low Phase Noise Cross-Coupled LC VCO Using 6-bit DCCA in 40nm CMOS Process

A 57&#x223c;66ghz CMOS Voltage-Controlled Oscillator Using Tunable Differential Inductor

A CMOS LC VCO with 3.2～6.1ghz Tuning Range

The Design of a 2.82～4.04 GHz CMOS Differential Tuned LC VCO

A 6.5mW, wide band dual-path LC VCO design with mode switching technique in 130nm CMOS

A Two-Story Quad-Core Dual-Mode VCO in 65-Nm CMOS