Abstract:In this article, an enhanced class-F voltage-controlled oscillator (VCO) with common-mode-noise self-cancellation (CM-NC) and common-mode-noise isolation (CM-NI) technique is proposed. With the proposed CM-NC technique, the common-mode-noise current of the drain coil and that of the nearby source coil are in the opposite direction. Therefore, the magnetic fields generated by the two coils cancel each other, which reduces the noise injected into the VCO from power supply and the ground node. Moreover, the principle of decoupling between the two inductors is also employed to eliminate the influence of the common-mode tail inductor on the differential mode. By winding the gate coil into a double-turn structure, the coupling noise from the drain inductor to the gate is opposite to the induced current of the gate coil, thereby cutting off the noise coupling path from the drain to the gate. Thanks to the dual-core 8-shaped inductor structure, the phase noise (PN) is improved without increasing the area, compared with existing methods using separated and dedicated tail filtering inductors. The VCO is fabricated in a 65-nm complementary metal–oxide–semiconductor (CMOS) technology. The measured tuning range is 21.7% from 11.5 to 14.3 GHz. The PN and figure of merit (FoM) at 1-MHz offset are $-$ 119.2 and 192.8 dBc/Hz, respectively. The power consumption across the frequency tuning range is 5.6–10 mW. The core area is 0.065 mm $^{2}$ and the total area is 0.26 mm $^{2}$ .

An X-Band Dual-Mode Class-C VCO with a 45.27% Tuning Range in 55-Nm CMOS

A Ku-Band 20.4% Tuning Range VCO with a Tunable Harmonic-Resonant Transformer in 55 Nm CMOS

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

A 60GHz voltage-controlled oscillator with a 3.6GHz tuning range in 180nm CMOS technology

A 31–46 GHz Dual-Core Class-C VCO Using Switchable Transformers in 28-Nm CMOS

A Wide Tuning Range Dual-Core Quad-Mode Orthogonal-Coupled VCO With Concurrently Dual-Output Using Parallel 8-Shaped Resonator

Design of 20ghz Wide Tuning Range LC-VCO in 55-Nm CMOS

A 6.5mW, wide band dual-path LC VCO design with mode switching technique in 130nm CMOS

A 47.6–71.0-GHz 65-nm CMOS VCO Based on Magnetically Coupled -Type LC Network

A 12.3–18.5-Ghz Single-Core Oscillator Using a Dual-Mode Variable Inductor with a Tunable Self-Resonant Frequency Technique

An Enhanced Class-F Dual-Core VCO With Common-Mode-Noise Self-Cancellation and Isolation Technique

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

A 5 to 11.1 GHz Quad-Core Quad-Mode Octave Tuning-Range CMOS LC VCO

A 4.2-5 GHz, Low Phase Noise LC-VCO with Constant Bandwidth and Small Tuning Gain

Dual-Path <formula Formulatype="inline"><tex Notation="TeX">$LC$</tex> </formula> VCO Design with Partitioned Coarse-Tuning Control in 65 Nm CMOS

A CMOS LC VCO with 3.2～6.1ghz Tuning Range

A 5-8 GHz Wideband and Low Phase Noise Cross-Coupled LC VCO Using 6-bit DCCA in 40nm CMOS Process

A 12.9-to-24 GHz Dual-Mode Multi-Coil VCO Achieving 199.2 Dbc/hz Peak FoMT in 65-Nm CMOS

A Two-Story Quad-Core Dual-Mode VCO in 65-Nm CMOS

A 79.1–87.2 GHz 5.7-Mw VCO with Complementary Distributed Resonant Tank in 45-Nm SOI CMOS