Abstract:Nanostructured Ni–Fe alloy coatings were developed galvanostatically using a new low-concentration bath. The composition and operating parameters of the bath were optimised by taking the benefit of the conventional Hull cell method. Ni–Fe alloy coatings were developed at different current densities (2.0 to 5.0 A dm −2 ), keeping pH = 2.5. The corrosion behaviour of electrodeposited alloy coatings was evaluated in 3.5% NaCl solution, using Electrochemical Impedance Spectroscopy (EIS) and potentiodynamic polarisation methods. Ni–Fe alloy coating, deposited at 2.0 A dm −2 exhibited a lesser corrosion rate (14.71 × 10 −2 mm y −1 ) than those at higher current densities. The lowest corrosion rate was attributed to its least crystallite size (10.4 nm), evidenced by an X-Ray Diffraction (XRD) study. The corrosion performance of Ni–Fe alloy coatings was discussed in the light of their surface morphology and composition, evidenced by SEM and Energy-Dispersive X-ray spectroscopy (EDS) analysis, respectively. On a développé de manière galvanostatique des revêtements en alliage Ni–Fe en utilisant un nouveau bain à faible concentration. On a optimisé la composition et les paramètres de fonctionnement du bain en profitant de la méthode conventionnelle de la cellule de Hull. On a développé des revêtements en alliage Ni–Fe à différentes densités de courant (2.0 à 5.0 A dm −2 ), en maintenant le pH = 2.5. On a évalué dans une solution de NaCl à 3.5% le comportement à la corrosion des revêtements de l'alliage électrodéposés, en utilisant les méthodes de spectroscopie d'impédance électrochimique (EIS) et de polarisation potentiodynamique. Il s'est avéré que le revêtement en alliage Ni–Fe déposé à 2.0 A dm −2 présentait le taux de corrosion le plus faible (14.71 × 10 −2 mm an −1 ), comparé à ceux présentant des densités de courant plus élevées. Le taux de corrosion le plus faible était attribué à la plus petite taille de cristallite (10.4 nm), mise en évidence par une étude de diffraction des rayons X (DRX). On a discuté de la performance à la corrosion des revêtements en alliage Ni–Fe à la lumière de leur morphologie et de leur composition de surface, mises en évidence respectivement par analyse de microscopie électronique à balayage (MEB) et de spectroscopie de rayons X à dispersion d'énergie (EDS).

Effect of bath ionic strength on adhesion and tribological properties of pure nickel and nickel composite coatings

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Effect of Current Density and Bath Temperature to The Corrosion and Wear Behaviour of Tungsten Carbide - Nickel Electrodeposition Coating

Tribo-corrosion and mechanical performance of electro-deposited nano-composite h-BN/epoxy coating

Electroplating and Physicochemical Properties of Zinc–Nickel Alloy Coatings from Ammonium Oxalate Electrolytes

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Effect of Surface Roughness and Structure Features on Tribological Properties of Electrodeposited Nanocrystalline Ni and Ni/Al2O3 Coatings

Effect of Particle Concentration on the Microstructure and Properties of Electrodeposited Nickel–Diamond Composite Coatings

Mechanical and Corrosion Resistance Properties of Tio2 Nanoparticles Reinforced Ni Coating by Electrodeposition

Influence of the bath pH value on the microstructure and properties of a novel electrodeposited Ni-W-Ti3C2TX composite coating

Investigation of the Tribological and Mechanical Properties of Electroless Ni-P-hBN Nano-Composite Coating

Electrochemical behavior and electro-crystallization mechanism of Cu-Ni/Nano-Al 2 O 3 coating with a deposition current density dependence

Evaluation of corrosion resistance of electrodeposited nanocrystalline Ni–Fe alloy coatings

Electroless deposition of ternary Ni–P alloy coatings containing tungsten or nano-scattered alumina composite on steel

Electrochemical development and characterisation of nanostructured Ni–Fe alloy coatings for corrosion protection

Tribological and Anticorrosion Performance of Electroplated Zinc Based Nanocomposite Coatings

Technology for Ni-Al2O3 Composite Coating and Its Properties

Morphological and functional characterization of electroplated Ni-graphene composite coatings

Electroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys

Study on mechanical and corrosion resistance of Ni-W-P composite coating reinforced by cationic cubic boron nitride

Type and concentration effects of particulate solid lubricants on the microstructure, friction, and wear of electrodeposited Ni composite coatings