Abstract:Molybdenum disulphide (MoS2) is widely used in tribological applications because of its solid lubricating properties. However, its performance needs to be further improved. In this work, an attempt has been made to improve the tribological performance of MoS2 coating by incorporating TiO2 nanoparticles as a reinforcement material into the MoS2 base matrix. The effects of crystallite size and wt.% addition of TiO2 onto the tribological properties of composite MoS2–TiO2 have been studied. Prior to application of the coating onto the substrate surface, it was pre-treated by phosphating which leads to improvement in the porosity and helps to enhance the bond strength between the coating and steel substrate. A tribological study of composite pure MoS2 coating and MoS2–TiO2 coating was carried out using the pin-on-disc test rig at different operating conditions (contact pressure, speed and temperature). It was observed that composite MoS2–TiO2 coating exhibits excellent tribological properties as compared to pure MoS2 coating. In addition, crystallite size of TiO2 and its different weight% significantly affect the tribological properties of the composite coating. Among all samples of composite MoS2–TiO2 coating, the sample C (27.69 nm crystallite size) with 15% wt. of TiO2 depicts the lowest friction coefficient and wear rate. The influence of temperature and coating thickness on the tribological properties of composite coating has been studied. The frictional coefficient has been reduced, and the wear rate increased with an increase in temperature of the coated pin surface. The similar kind of trend has been observed with respect to the coating thickness.

Type and concentration effects of particulate solid lubricants on the microstructure, friction, and wear of electrodeposited Ni composite coatings

Microstructure, Friction, And Wear Properties Of Ni-Al2o3-Mos2 Composite Coatings

Tribological behavior of Ni-based composite coatings produced by cold spray

One-step preparation of high performance Ni-MoS2 self-lubricating coatings via jet electrodeposition on additive manufactured aluminum alloy

Effect of Particle Concentration on the Microstructure and Properties of Electrodeposited Nickel–Diamond Composite Coatings

Friction and Wear Behaviors of Ni-based Composites Containing Graphite/Ag 2 MoO 4 Lubricants

Wear and Friction Properties of Electrodeposited Ni-Based Coatings Subject to Nano-enhanced Lubricant and Composite Coating

Tribological Behavior of High-Velocity Oxygen Fuel-Sprayed Ni-Based Self-Lubricating Composite Coatings

Tribological properties of magnetron sputtered MoS2/metal (Ti, Mo) nanocomposite coatings

Composite nickel coatings containing lubricating oil microcapsules and their tribological properties

Tribological Properties and Corrosion Resistance of Porous Structure Ni-Mo/ZrO2 Alloys

Preparation and Tribological Performance of Electrodeposited Ni-Tib2-Dy2o3 Composite Coatings

Effect of the Synergetic Action on Tribological Characteristics of Ni-Based Composites Containing Multiple-Lubricants

Ionic Liquid Lubrication of Electrodeposited Nickel–si3n4 Composite Coatings

Friction and wear behaviour of composite MoS2–TiO2 coating material in dry sliding contact

A Study of the Optimization Mechanism of Solid Lubricant Concentration in NiMoS2 Self-Lubricating Composite

Friction and wear performance of electrospark deposited Ni/C-MoS2 self-lubricating coating

Electrodeposited MoxSyOz/Ni Tribological Coatings

Study of Structural and Tribological Properties of MoS2-Ti Composite Coatings Deposited by Unbalanced Magnetron Sputter

Investigation of the microstructure and tribological properties of CNTs/Ni composites prepared by electrodeposition