Abstract:Effects of Ti addition on the microstructures and mechanical properties of AlCrFeNiMo 0.5 Ti x （X = 0, 0.25, 0.4,0.5, 0.6, 0.75） high entropy alloys（HEAs） are investigated. All these HEAs of various Ti contents possess dual BCC structures, indicating that Ti addition does not induce the formation of any new phase in these alloys. As Ti addition X varies from 0 to 0.75, the Vickers hardness（HV） of the alloy system increases from 623.7 HV to766.2 HV, whereas the compressive yield stress firstly increases and then decreases with increasing X above 0.5.Meanwhile, the compressive ductility of the alloy system decreases with Ti addition. The AlCrFeNiMo 0.5 Ti 0.6 and AlCrFeNiMo 0.5 Ti 0.75 HEAs become brittle and fracture with very limited plasticity. In the AlCrFeNiMo 0.5 Ti x HEAs, the AlCrFeNiMo 0.5 HEA possesses the highest compressive fracture strength of 4027 MPa and the largest compressive plastic strain of 27.9%, while the AlCrFeNiMo 0.5 Ti 0.5 HEA has the highest compressive yield strength of 2229 MPa and a compressive plastic strain of 10.1%. The combination of high strength and large plasticity of the AlCrFeNiMo 0.5 Ti x （X = 0, 0.25, 0.4, 0.5） HEAs demonstrates that this alloy system is very promising for engineering applications.

Microstructure and Properties of Al 0 : 5 CoCrCuFeNiTi x ( x 1⁄4 0 { 2 : 0 ) High-Entropy Alloys

Microstructure and properties of Al0.5CoCrCuFeNiTix (x = 0-2.0) high-entropy alloys

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Microstructure, Thermophysical and Electrical Properties in AlxCoCrFeNi (0 ≤ X ≤2) High-Entropy Alloys

Microstructure and Wear Behavior of AlxCo1.5CrFeNi1.5Tiy High-Entropy Alloys

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

On Microstructure and Mechanical Performance of AlCoCrFeMo0.5Nix High-Entropy Alloys

Microstructure and corrosion properties of AlxCuFeNiCoCr(x = 0.5, 1.0, 1.5, 2.0) high entropy alloys with Al content

Microstructure and Mechanical Properties of New AlCo<sub>x</sub>CrFeMo<sub>0.5</sub>Ni High-Entropy Alloys

Effects of Ti Content on the Microstructure and Mechanical Properties of Al0.2CoCrFeNi2Tix High-Entropy Alloys

Microstructure Characterization of AlxCo1Cr1Cu1Fe1Ni1 (x=0 and 2.5) High-Entropy Alloy Films

Deformation and Annealing Behaviors of High-Entropy Alloy Al0.5cocrcufeni

Microstructure and tensile properties of high-entropy alloy Al0.5CoCrFeNi particles reinforced Ti/Al laminated composite

Microstructural features and excellent compression properties of a novel Al0.7CoCrFeNiTi0.3 high entropy alloy

Microstructure and Mechanical Properties of Lightweight AlCrTiV0.5Cux High-Entropy Alloys

Morphology, Structure and Composition of Precipitates in Al0.3CoCrCu0.5FeNi High-Entropy Alloy

Effect of Aluminum Content on Microstructure and Mechanical Properties of Al X CoCrFeMo0.5Ni High-Entropy Alloys

Microstructures and Mechanical Properties of AlCrFeNiMo 0.5 Ti X High Entropy Alloys

Microstructure and Mechanical Property of As-Cast, -Homogenized, and -Deformed AlxCoCrFeNi (0≤x≤2) High-Entropy Alloys

Microstructure and Tensile Properties of Al0.5CoCrCuFeNi Alloys Produced by Simple Rolling and Annealing