Abstract:The surface chemical modification for the vapour grown carbon fibers (VGCF) produced with the catalytic dehydrogenation of hydrocarbon have been performed by concentrate nitric acid (65%similar to 68%) for various times in order to extend the practical application in composite materials. The structure of VGCF has been characterized by XRD technique. The XRD results show that the graphite crystal structures of VGCF are transformed upon modification, and the extent of transformation is a function of modification time. The BET results indicate that through the modification the S-BET of VGCF veries, and as the long modification time of 120 min is used. the SBET of VGCF decreases distinctly. The FTIR analyses illuminate that due to the modification the different functional oxygen-containing groups are grown on these surfaces of VGCF, and the total amount of the oxygen-containing groups increases with the modification time. In addition, the profiles of temperature programmed reduction (TPR) display that more than two kinds of oxygen-containing functional groups exist on the surfaces of VGCF and the total amount of oxygen for these oxygen-containing functional groups obtained is more than 2 mmol center dot g(-1). The inicrocalorimetric measurements of NH3 adsorption indicate that the strength and the amount of the functional groups of surface acids increase with the modification time. The transmission electron microscopy (TEM) shows that during modification no damage is observed on these surfaces of the VGCF. The experiments of absorbed oil value (AOV) exhibite that the AOV decreases sharply whereas the hydrophilicity of VGCF increases. Double fluid method for the measurements of the contact angles shows that after modification the surface energy (SE) of VGCF increases apparently. The FTIR measurements of the modified VGCF treated with the titanate coupling agent indicate that the bonding abilities between modified fibers surface and coupling agent are enhanced.

Observation and Explanation of a Kind of New Large Vapor-Grown Carbon Fibers ( VCGF )

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Surface Modification And Characterization Of Vapor Grown Carbon Fibers

Effect of Growth Time on the Morphologies of Vapour Grown Carbon Fibres and A Suggested Mechanism of Growth

Growth of well-crystallized segmented graphite nanofibers by catalytic chemical vapor deposition

Vapor-Liquid-Solid-Solid Growth Mechanism of Carbon Micro-coils

GROWTH CHARACTERS AND MODEL OF PYROLYTIC CARBON IN CHEMICAL VAPOR INFILTRATION PROCESS

In situ growth of CNTs on carbon fiber by chemical vapor deposition

The growth of multi-walled carbon nanotubes with different morphologies on carbon fibers

Investigation on the Formation Mechanism of Double-Layer Vertically Aligned Carbon Nanotube Arrays via Single-Step Chemical Vapour Deposition

Facile growth of vertically-aligned graphene nanosheets via thermal CVD: The experimental and theoretical investigations

Buliding microstructures of organized carbon nanotubes by chemical vapor deposition

Synthetic Hierarchical Nanostructures: Growth of Carbon Nanofibers on Microfibers by Chemical Vapor Deposition

From Carbon Nanotube Crystals to Carbon Nanotube Flowers

In situ growth of carbon nanotubes on graphene oxide fibers by thermal chemical vapor deposition

3D Graphene Fibers Grown by Thermal Chemical Vapor Deposition.

A Vapor-Liquid-Solid Model for Chemical Vapor Deposition Growth of Carbon Nanotubes

Alcohol-Assisted Rapid Growth of Vertically Aligned Carbon Nanotube Arrays

Grapevine-like Growth of Single Walled Carbon Nanotubes among Vertically Aligned Multiwalled Nanotube Arrays

Rational Control on Floating Catalysts for the Growth of Carbon Nanotube Assemblies: from Vertically Aligned Carbon Nanotube Arrays to Carbon Nanotube Films