Abstract:The surface chemical modification for the vapour grown carbon fibers (VGCF) produced with the catalytic dehydrogenation of hydrocarbon have been performed by concentrate nitric acid (65%similar to 68%) for various times in order to extend the practical application in composite materials. The structure of VGCF has been characterized by XRD technique. The XRD results show that the graphite crystal structures of VGCF are transformed upon modification, and the extent of transformation is a function of modification time. The BET results indicate that through the modification the S-BET of VGCF veries, and as the long modification time of 120 min is used. the SBET of VGCF decreases distinctly. The FTIR analyses illuminate that due to the modification the different functional oxygen-containing groups are grown on these surfaces of VGCF, and the total amount of the oxygen-containing groups increases with the modification time. In addition, the profiles of temperature programmed reduction (TPR) display that more than two kinds of oxygen-containing functional groups exist on the surfaces of VGCF and the total amount of oxygen for these oxygen-containing functional groups obtained is more than 2 mmol center dot g(-1). The inicrocalorimetric measurements of NH3 adsorption indicate that the strength and the amount of the functional groups of surface acids increase with the modification time. The transmission electron microscopy (TEM) shows that during modification no damage is observed on these surfaces of the VGCF. The experiments of absorbed oil value (AOV) exhibite that the AOV decreases sharply whereas the hydrophilicity of VGCF increases. Double fluid method for the measurements of the contact angles shows that after modification the surface energy (SE) of VGCF increases apparently. The FTIR measurements of the modified VGCF treated with the titanate coupling agent indicate that the bonding abilities between modified fibers surface and coupling agent are enhanced.

Surface Modification And Characterization Of Vapor Grown Carbon Fibers

Surface Modification and Characterization of Vapor Grown Carbon Fibers

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Study on Carbon Fiber Surface Treatment Based on Surface Oxidation Method

High Efficient and Continuous Surface Modification of Carbon Fibers with Improved Tensile Strength and Interfacial Adhesion

Surface modification of poly(vinyl alcohol) fibers to control the fiber-matrix interaction in composites

Surface Modification of Carbon Fiber by Electro-Polymerization: Continuous Production, Thickness Control, Colorization, and Preparation of CFRP

Research progress on the surface modification of carbon fiber

On demand thermal surface modification of carbon fiber for improved interfacial shear strength

Oxidative Stabilization of Pan/Vgcf Composite

Modification on carbon fiber surface with pyrolytic deposition combined with PAMAM grafting

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

Mechanical Characterization of Glass/epoxy Polymer Composites Sprayed with Vapor Grown Carbon Nano Fibers

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

Surface modification of activated carbon fiber and its adsorption for vitamin B1 and folic acid

Surface Analysis of Plasma Grafted Carbon Fiber

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

Construction of Polar Functional Groups on the Surface of a High-Modulus Carbon Fiber and Its Effect on the Interfacial Properties of Composites

Growth of Carbon Black Onto Continuous Carbon Fiber to Produce Composites with Improved Mechanical and Interfacial Properties: A Step Closer to Industrial Production

Improving the interfacial property of carbon fiber/vinyl ester resin composite by grafting modification of sizing agent on carbon fiber surface

The surface modification of carbon fiber for thermoplastic HDPE composites