Surface Modification of Carbon Fiber by Electro-Polymerization: Continuous Production, Thickness Control, Colorization, and Preparation of CFRP
Bincheng Zhao,Hui Gao,Sanbao Li,Jun Nie,Fang Sun,Xiaoqun Zhu
DOI: https://doi.org/10.1021/acsapm.0c00232
2020-06-17
ACS Applied Polymer Materials
Abstract:Carbon fibers (CFs) have been widely used as reinforcing materials because of their excellent specific strength, specific modulus, corrosion resistance, energy absorption, and other properties. To improve the mechanical properties of CF-reinforced composites, one of the effective methods is to improve the interfacial force between the CF and the polymer through modification of CFs. The aim of this study is to modify the surface of the CF with an environmentally friendly and efficient way and to design a continuous production equipment. In this research, a continuous electro-polymerization equipment was designed, and the surface of the CFs was modified by epoxy or vinyl ether, which was initiated by photoinitiator UVI-6974 without adding any solvent and extra electrolytes. By changing the structure of monomers, polymerization time, voltage, concentration of the initiator, and the distance between CFs and electrodes, the performance and thickness of the polymer layer on the CFs were controllable. The results of scanning electron microscopy and infrared spectroscopy proved that the surface of the CFs was covered by polymers, and some unreacted functional groups remained. The mechanical performances of CF composites prepared from the BDE/DVE-3-modified CFs showed that the interlaminar shear strength improved by 46.98 and 62.02%, and the tensile strength improved by 11.40 and 16.62%, respectively, compared with unmodified CFs. This proved that the interface force between the resin and the CF was greatly improved by the thin polymer layer on the surface of the CF and the unreacted functional groups. On the other hand, if pigments or dyes were added to the polymerization system, colored CFs could be fabricated by this equipment continuously. Because of the solvent-free, low-voltage, and continuous fabrication, this electro-polymerization method has a good industrial prospect.This article has not yet been cited by other publications.
polymer science,materials science, multidisciplinary