Abstract:The interfacial compatibility plays an important role in the performance of fiber-reinforced composite laminates. Aramid fiber is an important class of high performances fibers. However, the inertia of fiber surface is not conducive to the improvement of composite properties. In this work, polyarylene ether nitrile terminated with phthalonitrile (PEN-t-Ph) was supplied to modify the aramid fiber (m-AF). By heat treatment and riveting PEN-tPh to the fiber surface, a rough fiber surface can be obtained, and then the composite material with improved performance can be obtained through the entangling compatibility. Through SEM images, it could be seen that the fiber surface had the best rivet surface morphology when the fiber surface coated with 5 wt% PEN-t-Ph (m(5 wt%)-AF). At the same time, the interfacial adhesion between m(5 wt%)-AF and the resin matrix showed the best peel strength of 1.594 kN/m. Based on these results, modified fiber resin composite laminates (m(5 wt%)-AF/ PEN-t-Ph) were fabricated. The results indicated that the laminates had good interfacial compatibility and the interlaminar shear strength (ILSS) of modified aramid fiber laminates was 112.58 MPa, which is increased by 21.4% than that of original fiber composite laminates. In addition, the flexural strength of m-AF/PEN-t-Ph laminates was 324 MPa, increased by 10% compared to AF/PEN-t-Ph. The results of DMA showed that the energy storage modulus of the m-AF/PEN-t-Ph laminate was greatly improved compared with that of AF/PEN-t-Ph laminate, which was increased by 60% under the initial condition of 100 C. To sum up, through surface treatment, the mechanical properties of fiber-reinforced composite laminates had been greatly improved, making them have great application prospects in bulletproof and other fields.

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Functionalized Aramid Nanofibers Prepared by Polymerization Induced Self-Assembly for Simultaneously Reinforcing and Toughening of Epoxy and Carbon Fiber/epoxy Multiscale Composite

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Influence of Polyamide Acid Coating Reaction on the Properties of Aramid Fibre

Preparation of highly active aramid fiber and effect on the interface property of aramid/epoxy composites

Enhanced interfacial adhesion of aramid fiber reinforced rubber composites through bio‐inspired surface modification and aramid nanofiber coating

Layer-by-Layer Self-Assembly Strategy for Surface Modification of Aramid Fibers to Enhance Interfacial Adhesion to Epoxy Resin

Surface modification of aramid fiber by crystalline polyarylene ether nitrile sizing for improving interfacial adhesion with polyarylene ether nitrile

Effects of aramid nanofibers on the mechanical properties of epoxy resin and improved adhesion with aramid fiber

Enhanced Interfacial Bonding of AF/PEEK Composite Based on CNT/aramid Nanofiber Multiscale Flexible-Rigid Structure

Aramid fiber coated with aramid nanofiber coating to improve its interfacial properties with polycarbonate

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

A Facile Method to Prepare Nanoscale Polyacrylonitrile Particles Grafted Aramid Fibers for Superior Interfacial and Mechanical Properties of Epoxy Composites

Surface Modification of Aramid Fibers by Amino Functionalized Silane Grafting to Improve Interfacial Property of Aramid Fibers Reinforced Composite

Construction of an Interfacial Layer of Aramid Fibers Grafted with Glycidyl POSS Assisted by Heat Treatment and Evaluation of Interfacial Adhesion Properties with Epoxy Resin

Interfacial enhancement of carbon fiber composites by poly(amido amine) functionalization

Co-depositing bio-inspired tannic acid-aminopropyltriethoxysilane coating onto carbon fiber for excellent interfacial adhesion of epoxy composites

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Surface Coating of Aramid Fiber by a Graphene/Aramid Nanofiber Hybrid Material to Enhance Interfacial Adhesion with Rubber Matrix

Study on the Construction of Dopamine/Poly(ethyleneimine)/Aminoated Carbon Nanotube Multilayer Films on Aramid Fiber Surfaces to Improve the Mechanical Properties of Aramid Fibers/Epoxy Composites