Abstract:Prominent interfacial bonding can significantly improve the stress transfer efficiency between carbon fibers and matrix, which is the basis of efficient and long-term application of composites. In this paper, a bicomponent collaborative strategy was proposed to fully utilize the advantages of silicon nitride nanowires (SNs) and carbon nanotubes (CNTs) to optimize the interfacial strength of carbon fiber modified double matrix composites (CD), in which the double matrix was represented by polymers-hydroxyapatite and pyrocarbon-hydroxyapatite. The microstructure displayed that SNs were randomly distributed inside CD and completely wrapped by CNTs, which combined to form an interlocking structure. The mechanical and friction behavior of modified and unmodified composites was investigated. The compression strength and shear strength of CNTs-SNs modified carbon fiber/polymers-hydroxyapatite composites were 110 ± 2.39 MPa and 56 ± 1.13 MPa, displaying an increment of 69% and 87%. The wear rate was 0.4 × 10 −14 ± 0.008 m 3 N −1 m −1 , exhibiting a 61% decline. The fracture morphologies were observed to analyze the strengthening mechanism. Interlocked CNTs-SNs could strengthen the effective bonding of fiber/matrix interface and SNs/matrix interface, provide lots of nucleation sites for the matrix, and enhance the matrix cohesion. The enhancement was further verified by a 56% increase in the compression strength (237 ± 4.67 MPa), a 235% increase in the shear strength (77 ± 1.53 MPa), a 78% decrease in wear rate (0.38 × 10 −13 ± 0.011 m 3 N −1 m −1 ) of CNTs-SNs modified carbon fiber/pyrocarbon-hydroxyapatite composites, indicating that CNTs-SNs played an indispensable role in making CD possess brilliant mechanical and biological friction properties.

Construction of an Orderly Carbon Fiber/Carbon Nanotubes Hybrid Composites by a Mild, Effective, and Green Method for Highly Interface Reinforcement

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Construction of polydopamine and carbon nanotube on carbon fiber surfaces to improve the mechanical properties of CF/PLA composite

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites

Construction of cellulose nanofiber/carbon nanotube synergistic network on carbon fiber surface to enhance mechanical properties and thermal conductivity of composites

Polydopamine particle in-situ assisted carbon fiber/CNTs brush with dynamic imine bonds for enhancing the interface properties of its polyamide 6 composites

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Construction of dendritic polymers on carbon fiber surfaces to improve the interfacial bonding of carbon fiber/silicone rubber composites

Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

A facile method for carbon nanotube/carbon fiber‐reinforced polylactic acid composites

Constructing "nunchaku-like" multi-stage gradient interface via covalently grafting rigid-flexible-rigid structures onto carbon fibers: An effect strategy to improve interfacial properties of composites

Enhancing the Interfacial Shear Strength and Tensile Strength of Carbon Fibers through Chemical Grafting of Chitosan and Carbon Nanotubes

Interface design of carbon fiber composites by fabricating interlocked carbon nanotubes-silicon nitride nanowires

Construction of "hard‐soft‐hard" structures with ammonium cerium nitrate/sodium alginate/carbon nanotubes on carbon fiber surfaces for superior mechanical

Structural design of "straw and clay" based on cellulose nanofiber/polydopamine and its interfacial stress dissipation mechanisms

Chemical modification of carbon fiber with diethylenetriaminepentaacetic acid/halloysite nanotube as a multifunctional interfacial reinforcement for silicone resin composites