Abstract:Introduction. Thermal expansion is an important thermal and physical characteristic of materials, showing its expansion when heated. Knowing this property is important both from a scientific point of view and for practical applications. Materials with low thermal expansion are widely used in electronics, thermal barrier coatings and other applications. Mismatch in thermal expansion between different materials can lead to thermal stress on contact surfaces. The in-situ synchrotron X-ray diffraction method can detect this mismatch. Thermal stress requires an analysis of the coefficient of thermal expansion. Bulk expansion behavior is observed in thermally sprayed coatings. The CTE is important for designing and predicting coating performance under thermal stresses. Changes in the KTE can cause cracking and degradation of the coating. In-situ X-ray diffraction analysis helps to understand thermal expansion, crystallite size and stress and strain variation with temperature change. The aim of this work is to interpret and use in-situ high temperature X-ray diffraction as an effective tool to study the thermal mismatch behavior of a W-Co alloy substrate (8 % w/w Co, WC — matrix) with CrN, ZrN and CrZrN multilayer coatings and the characteristic differences between single component coatings and its combination in a multilayer coating. Research Methodology. In this work, specimens of chromium and zirconium nitride coatings deposited on W-Co hard alloy substrates were investigated. The fundamental method in this work is in-situ analysis using synchrotron radiation. The lattice parameter as a function of cycling temperature, the coefficient of thermal expansion during heating and cooling, and the thermal expansion mismatch between the substrate-coating pair and the coating layers in the multilayer coating were evaluated. Results and discussion. The lattice parameters and thermal expansion of the coatings are investigated. The lattice parameter of all coatings decreased during thermal cycling, indicating nitrogen evaporation. The multilayer coating has the least change in the parameter, possibly due to diffusion barriers. Lattice distortions do not differ between single and multilayer coatings. All coatings exhibit thermal expansion similar to the substrate. The multilayer coating creates conditions for compressive stresses in one phase and tensile stresses in the other phase, so the lifetime of multilayer coatings is expected to be high.

Microstructure and Phase Composition of ZrN/SiNx Multilayered Coatings Formed by Reactive Magnetron Deposition

In-situ analysis of ZrN/CrN multilayer coatings under heating

Self-formation of dual-phase nanocomposite Zr–Cu–N coatings based on nanocrystalline ZrN and glassy ZrCu

The structure and composition of Al-Si-N/Ni/Al-Si-N three-layer coatings deposited by magnetron sputtering

Investigation of NbN and Nb-Si-N Coatings Deposited by Magnetron Sputtering

Structural and Phase Transformations in Plasma-Spray ZrB2–SiC–AlN Coatings on a C/C–SiC Substrate After High-Temperature Thermal Cyclic Heating

Deposition, microstructure and nanoindentation of multilayer Zr nitride and carbonitride nanostructured coatings

Comparative Study of Zirconium Nitride Multilayer Coatings: Crystallinity, In Vitro Oxidation Behaviour and Tribological Properties Deposited via Sputtering and Arc Deposition

Microstructure, high-temperature corrosion and steam oxidation properties of Cr/CrN multilayer coatings prepared by magnetron sputtering

Deposition and Characterization of a ZrN/Zr/a-C Multilayer: Implication on Bio-Tribological and Corrosion Behaviors

Microstructure and Tribological Properties of Multilayered ZrCrW(C)N Coatings Fabricated by Cathodic Vacuum-Arc Deposition

Synthesis ZrON Films with Raman-Enhancement Properties Using Microwave Plasma

Evolutions of the Microstructure and Properties of the (CrMoNbTaZr)NX Films Prepared by Reactive Magnetron Sputtering: Effects of Stoichiometry and Crystallinity

Microstructure, Mechanical and Tribological Properties of Advanced Layered WN/MeN (Me = Zr, Cr, Mo, Nb) Nanocomposite Coatings

Residual Stress and Tribological Performance of ZrN Coatings Produced by Reactive Bipolar Pulsed Magnetron Sputtering

The effect of nanometre-scale kinetic competition on the phase selection in Zr/Si superstructure

Microstructure and Ablation Behavior of W/ZrC/SiC Coating on C/C Composites Prepared by Reactive Melt Infiltration and Atmospheric Plasma Spraying

Deposition rate controls nucleation and growth during amorphous/nanocrystalline competition in sputtered Zr-Cr thin films

In situ crystal lattice analysis of nitride single-component and multilayer ZrN/CrN coatings in the process of thermal cycling

Data on the effect of structure, elemental and phase composition gradient of nitride multilayer coatings on corrosion protection of different substrates in 3% NaCl and 5% NaOH solutions

Microstructure and properties of a novel designed interpenetrating network structure silicide/HfxZr1−xC multi-phase outer layer