Abstract:Owing to its excellent corrosion, radiation and high temperature resistance, ZrO 2 has been considered as a strong candidate material for inert fuel for the incineration of actinides. In this paper, a combination of thermal spike model and molecular dynamics is used to simulate the phase transition process of ZrO 2 in the nuclear radiation environment. Based on the thermal spike model, two coupled diffusion equations are established with considering the multiple physical process of energy deposition and transmission after the implantation of swift heavy ions into target material. The space-time evolution characteristics of ZrO 2 lattice temperature are obtained by solving the coupled diffusion equations numerically. Then the phase transformation of ZrO 2 form monoclinic phase to tetragonal phase under the thermal spike is investigated on an atomic scale by means of molecular dynamics. It is found that a cylindrical track with a radius of 7 nm is generated in the center of ZrO 2 after the implantation of swift heavy ion with an electronic energy loss of 30 keV·nm –1 . The lattice melts immediately in the center of track, accompanied with the coordination number of Zr decreasing from 7 to 4–6. Then at about 2 ps, the melting zone gradually turns cool and recrystallized. And in the center of the melting zone, voids begin to form and are surrounded by a highly disordered amorphous region. Meanwhile, tetragonal phase of ZrO 2 , whose coordination number of Zr is 8, is formed at the periphery of the amorphous region, which is also confirmed by the XRD calculation results. As energy transfers from track center to the surround, the tetragonal region gradually develops into the whole system, accompanied with the increase of voids size. The simulation results indicate that the irradiation of ZrO 2 with swift heavy ions can lead to a transformation from the monoclinic to the tetragonal phase when the deposited electronic energy loss exceeds an effective threshold ~21 keV·nm –1 , greater than the experimental value (12 keV·nm –1 ), which was mainly due to the large difference between the simulated and measured incident ion fluences and the accuracy of the force field used in the molecular dynamics.

The effect of nanometre-scale kinetic competition on the phase selection in Zr/Si superstructure

Effect of Si on the structure and oxidation behavior of Cr-Si coatings on Zry-4 under high temperature steam environment

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Chemical regulation in the bonding reconstruction stage of amorphous Zr-Si oxidation and the resultant phase selection

Effect of Nano-ZrO2 on the Microstructure and High Temperature Tribological Properties of MoSi2 Coating

High-temperature steam oxidation resistance of Cr-Si substitutional solid solution coating on Zr-4

Microstructure and properties of a novel designed interpenetrating network structure silicide/HfxZr1−xC multi-phase outer layer

Xe20+ ions irradiation and autoclave corrosion coupled with steam oxidation behaviors of FeCrAlMoSiY-coated Zr claddings

Molecular Dynamics Simulation of Phase Transition by Thermal Spikes in Monoclinic ZrO2

Effect of Diffusion Barriers on Steam Oxidation Properties and Interface Evolutions of Cr Coating for Zirconium Alloy at 1200 °C

Microstructure and abrasive resistance of ZrO2-MoSi2 coatings deposited by supersonic plasma spraying

Characterization of Multi-Scale Synergistic Toughened Nanostructured YSZ Thermal Barrier Coatings: from Feedstocks to Coatings

Microstructural Understanding of CrN Layer As a Barrier Against Cr-Zr Interdiffusion in Cr-coated Zirconium Alloy for Accident Tolerant Fuel Claddings

Improved Thermal Stability and Oxygen‐Barrier Performance of SiO2 Thin Films by Modifying Amorphous Network Structure

Phase-field Simulation of High-Temperature Corrosion of Binary Zr-2.5Sn Alloy

Phase and microstructure evolutions of in-situ ZrC composite coating under plasma torch ablation

Microstructure and high-temperature oxidation behaviour of anti-oxidation coating on zirconium alloys: An overview

Influence of Al Concentration on Mechanical Property and Oxidation Behavior of Zr-Al-C Coatings

The enhanced structure stability and the reinforcement mechanism of 0.1Al2O3-ZrO2 reinforced MoSi2 composite coating

Effect of alloying element on microstructure, mechanical property, and oxidation resistance of ZrMeC (MeSi/Y) coatings

Phase Constitutions of MoSiN Anti-Oxidation Multi-Layer Coatings on CC Composites by Fused Slurry