Abstract:As a promising new power source, the proton exchange membrane fuel cell (PEMFC) has attracted extensive attention. The PEMFC engine produces a large amount of waste heat during operation. The excessive temperature will reduce the efficiency and lifespan of PEMFC engine and even cause irreversible damage if not taken away in time. The thermal management system of the PEMFC plays a critical role in efficiency optimization, longevity and operational safety. To solve the problem of high heat production in the operation of the PEMFC, two approaches are proposed to improve the heat dissipation performance of the radiators in thermal management systems. Three kinds of nanofluids with excellent electrical and thermal conductivity–Al2O3, SiO2 and ZnO– are employed as the cooling medium. The radiator parameters are optimized to improve the heat transfer capability. A typical 1D thermal management system and an isotropic 3D porous medium model replacing the wavy fin are constructed to reveal the effects of the nanofluid and the parameters of the radiator performance and the thermal management system. The results show that all three kinds of nanofluids can effectively improve the heat transfer capacity of the coolant, among which the comprehensive performance of the Al2O3 nanofluid is best. When the mass flow rate is 0.04 kg/s and the concentration is 0.5 vol%, the amount of heat transfer of the Al2O3 nanofluid increases by 12.7% when compared with pure water. Under the same conditions, it can reduce the frontal area of the radiator by 12%. For the radiator, appropriate reduction of the fin pitch and wavy length and increase of wave amplitude can effectively improve the spread of heat. The use of fin parameters with higher heat dissipation power results in lower coolant temperatures at the inlet and outlet of the stack. The performance of the radiator is predicted by the two model-based approaches described above which provide a reliable theoretical basis for the optimization of the thermal management system and the matching of the components.

Research on Performance of Cold Start Air Preheating System for Fuel Cell Engine

Performance Prediction of Plate-Fin Radiator for Low Temperature Preheating System of Proton Exchange Membrane Fuel Cells Using CFD Simulation

Research on low-temperature performance of plate-fin hydrogen preheater for a proton-exchange membrane fuel cell

Research on Water and Heat Management in the Cold Start Process of Proton Exchange Membrane Fuel Cell with Expanded Graphite Bipolar Plate

Numerical study on the influence of waveform channel and related design parameters on the cold start of proton exchange membrane fuel cell

Modelling, validation and analysis of preheating strategy of fuel cell vehicle during Subzero cold start

Numerical studies of cold-start phenomenon in PEM fuel cells

Model-Based Performance Optimization of Thermal Management System of Proton Exchange Membrane Fuel Cell

Theoretical analysis on cold start process of proton exchange membrane fuel cell with different flow fields based on the coupling of redox reaction and dynamic response of porous materials

Performance prediction of proton exchange membrane fuel cell engine thermal management system using 1D and 3D integrating numerical simulation

Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell

Investigation of assisted heating cold start strategies from -40 °C for proton exchange membrane fuel cell stack

Research on Thermal Management System of Fuel Cell Engine for Vehicle

Numerical and Experimental Investigation of Enhanced Heat Transfer Radiator Through Air Deflection Used in Fuel Cell Vehicles

Study on the temperature distribution and its effect on self-start of large-area proton exchange membrane fuel cells at subzero temperatures

Study on Fast Cold Start-Up Method of Proton Exchange Membrane Fuel Cell Based on Electric Heating Technology

Mechanism analysis of the effect of different gas manifold positions on proton exchange membrane fuel cell cold start performance

Numerical Investigation on the Temperature Distribution Inside the Engine Compartment of a Fuel Cell Vehicle with Nanofluids As Coolant

Design and optimization of thermal strategy to improve the thermal management of proton exchange membrane fuel cells

Study on internal dynamic response during cold start of proton exchange membrane fuel cell with parallel and serpentine flow fields

Optimization of fast cold start strategy for PEM fuel cell stack