Investigation on the temperature uniformity and efficiency of cold start-up for proton exchange membrane fuel cell stack based on catalytic hydrogen/oxygen method

Jiaqi Sun,Xiaokang Yang,Shucheng Sun,Zhigang Shao
DOI: https://doi.org/10.1016/j.jpowsour.2021.229755
IF: 9.2
2021-06-01
Journal of Power Sources
Abstract:<p>The catalytic hydrogen/oxygen reaction method is one of the primary ways to realize the rapid cold start of proton exchange membrane fuel cell (PEMFC). In this study, the start-up capacity of the catalytic hydrogen/oxygen reaction method is systematically investigated. A tremendous nonuniformity of temperature distribution is found under the condition of one-way mixture gas supply. A reverse feeding unit (RFU) is invented to realize a double-way gas supply to solve this problem. With the aid of RFU, the temperature uniformity during cold start is greatly improved. When the flow rate is 30 L min<sup>−1</sup> and air fraction is 24%, the average and the lowest temperature take 55 s and 79 s respectively to rise from −32 °C to 0 °C, and the maximum temperature variance is 12.6. However, the lowest temperature of stack only arrives at −11.8 °C in 79 s when one-way mixture gas is supplied, and the temperature variance evidently increase to 21.4. After the preheating period, the output performance using RFU is 6.01% higher than the one-way gas supply method when the loading current is 250 mA cm<sup>−2</sup>. The temperature uniformity and power output is improved remarkably by the RFU.</p>
energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the non - uniform temperature distribution during the rapid start - up process of proton exchange membrane fuel cells (PEMFC) under low - temperature conditions. Specifically, the paper focuses on the non - uniformity of temperature distribution in the PEMFC stack under the condition of unidirectional mixed - gas supply. This non - uniformity will affect the performance and lifespan of the battery stack. Especially during low - temperature start - up, water may freeze, thus affecting or preventing the progress of electrochemical reactions. To solve this problem, the researchers invented a Reverse Feeding Unit (RFU), which improves the temperature uniformity during the cold - start process by achieving bidirectional gas supply. Through experiments, the temperature distribution and start - up performance under the unidirectional gas supply and the proposed bidirectional gas supply strategy were compared. The results show that using RFU can significantly improve temperature uniformity and power output.