Abstract:The cold start-up of the PEMFC (proton exchange membrane fuel cell) stack from sub-zero temperature is considered one of the significant obstacles to its expansive commercial applications. In the cold start-up process, with the progress of hydrogen/oxygen chemical reaction, the produced water will freeze into ice, occupying the pores of the porous electrode, thus leading to a rapid deterioration of output performance and even making the cold start-up fail. In this work, a one-dimensional numerical model is adopted to study a cold start-up process of the PMEFC stack starting from −30°C. The stepwise-changed current loading mode is employed in the process. An assisted preheating method is used to explore an optimal operating condition for a successful cold start-up. The numerical results are validated by comparing the numerical result with the experimental data in reference, and they agree with the experimental data very well. The results show that the optimal heating power in the studied range is 100 W. As the initial current slope increased, the current peak value increased, but the cold start-up process failed. Also, the start-up time and ice volume fraction are highly dependent on the initial current slope. The optimal initial current slope is 0.7 A/s. Besides, a higher initial current slope will cause a significant inner ohmic resistance. The resistance of CLa (catalyst layer of the anode) is the key and primary part of the total ohmic resistance. The details of the research and the analyzed results will help design the cold start-up strategy for the PEMFC stack start-up from −30°C.

Research on Water and Heat Management in the Cold Start Process of Proton Exchange Membrane Fuel Cell with Expanded Graphite Bipolar Plate

A Pem Fuel Cell Model for Cold-Start Simulations

Study on Fast Cold Start-Up Method of Proton Exchange Membrane Fuel Cell Based on Electric Heating Technology

Theoretical analysis on cold start process of proton exchange membrane fuel cell with different flow fields based on the coupling of redox reaction and dynamic response of porous materials

Research on Cold Start of Proton-Exchange Membrane Fuel Cells Based on Model Predictive Control

Numerical studies of cold-start phenomenon in PEM fuel cells

Freeze Start of Proton Exchange Membrane Fuel Cell Systems with Closed-Loop Purging and Improved Voltage Consistency

Numerical study on the influence of waveform channel and related design parameters on the cold start of proton exchange membrane fuel cell

Investigation of assisted heating cold start strategies from -40 °C for proton exchange membrane fuel cell stack

Control-Oriented Modeling of Purging Process and Cold Start of Proton-Exchange Membrane Fuel Cell

A Novel Multi-Physics Pore-Scale Model of Multiphase Reactive Flow and Heat Transfer at Subzero Temperatures in the Gas Diffusion Layer of Proton Exchange Membrane Fuel Cells

Optimization of fast cold start strategy for PEM fuel cell stack

Numerical Studies of Cold-Start Phenomena in PEM Fuel Cells: A Review

Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures

Study on internal dynamic response during cold start of proton exchange membrane fuel cell with parallel and serpentine flow fields

Numerical Simulation of the Cold-Start Process of Polymer Electrolyte Fuel Cell

Study on the temperature distribution and its effect on self-start of large-area proton exchange membrane fuel cells at subzero temperatures

Research on low-temperature performance of plate-fin hydrogen preheater for a proton-exchange membrane fuel cell

Investigation on the temperature uniformity and efficiency of cold start-up for proton exchange membrane fuel cell stack based on catalytic hydrogen/oxygen method

Numerical Research on the Cold Start-up Strategy of a PEMFC Stack from −30°C

Cold Start Mode Classification Based on the Water State for Proton Exchange Membrane Fuel Cells