Abstract:In the research and development of technology and equipment for bamboo products deep processing, such as filling, drying, and medicinal use of bamboo flour (BF), the poor compaction and fluidity of BF materials entails the need for accurate discrete element model (DEM) and BF parameters to provide a reference for the simulation of BF processing operationsand the development of related equipment. The average particle size of the 5 types of BFs ranges from 0.136 mm to 0.293 mm, and the small particle size of BF particles causes to the number of BF particles in bamboo processing equipment to reach tens of millions or even billions. When conventional methods are used for simulation, ordinary computers cannot provide the required computing power. To address the aforementioned challenges, this paper proposes a calibration method for the discrete element contact parameters of BFs based on dimensional analysis and a back propagation (BP) neural network. Using particle scaling theory and dimensional analysis methods, the average particle size of the BF was increased to 1 mm, and the main discrete element contact parameters of the five types of BF to be tested were used as input layers. The injection method and sidewall collapse method were used to obtain the angle of repose (AR) as the output layer. Fifty groups were randomly selected using MATLAB for EDEM simulation, and the simulation results were trained using the BP neural network algorithm; an ideal neural network model was obtained, the discrete element parameters of different BFs were predicted, and physical experiments were performed to verify two types of AR and mold hole compression under calibrated parameters. The relative error between the simulated AR obtained through calibration parameters and the physical experimental values is less than 2.3%. Through BF parameter validity verification, the simulated maximum compression displacement and compression ratio after stabilization were 34.81 mm and 0.477, which were close to the actual experimental results of 34.77 mm and 0.461, respectively, verifying the accuracy of the neural network prediction model. The research results provide a reference for the simulation of BF processing operations and the development of related equipment.

BACK-ANALYSIS ON MICROMECHANICAL PARAMETERS OF SOIL MASS USING BP NEURAL NETWORK

Finite Element Geotechnical Analysis Incorporating Deep Learning-Based Soil Model

Study on the Crack Mechanism and Back Analysis of Mechanics Parameters of the Soil Slope in the New Area of MaGang

Back analysis of mechanical parameters of rock masses based on multi-point time-dependent monitoring data

Modelling of particle flow code geotechnical material parameter relationships based on orthogonal design and back propagation neural network

Method of soil-elastoplastic DEM parameter calibration based on recurrent neural network

Numerical Simulation and Deformation Prediction of Deep Pit Based on PSO-BP Neural Network Inversion of Soil Parameters

Comprehensive monitoring of talus slope deformation and displacement back analysis of mechanical parameters based on back-propagation neural network

Parameter calibration method of clustered-particle logic concrete DEM model using BP neural network-particle swarm optimisation algorithm (BP-PSO) inversion method

Modelling the mechanical behaviour of soils using machine learning algorithms with explicit formulations

Application of Soil Parameter Inversion Method Based on BP Neural Network in Foundation Pit Deformation Prediction

Study on Settlement of Self-Compacting Solidified Soil in Foundation Pit Backfilling Based on GA-BP Neural Network Model

Back-Analysis of Rock Mechanic Parameters Based on Coupling Algorithm of Adaptive Particle-Awarm-Optimization and Back-Propagation Neural Network

Application of BP Neural Network to the Back Analysis of Mechanical Parameters of Tunnel Surrounding Rock

Assessment Method for Soil Environmental Quality Based on BP Neural Network

Prediction of Soil Hydraulic Characteristic Parameters Based on BP Neural Network

Correction of soil parameters in calculation of embankment settlement using a BP network back-analysis model

MODIFIED BP BACK ANALYSIS OF 3D IN-SITU STRESSES

Calibration of discrete meta-parameters of bamboo flour based on magnitude analysis and BP neural network

Prediction of TBM penetration rate based on Monte Carlo-BP neural network

Research on prediction model of geotechnical parameters based on BP neural network