Abstract:In the field of soil mechanics, especially in transportation and environmental geotechnics, the use of machine learning (ML) techniques has emerged as a powerful tool for predicting and understanding the compressive strength behavior of soils especially graded ones. This is to overcome the sophisticated equipment, laboratory space and cost needs utilized in multiple experiments on the treatment of soils for environmental geotechnics systems. This present study explores the application of machine learning (ML) techniques, namely Genetic Programming (GP), Artificial Neural Networks (ANN), Evolutionary Polynomial Regression (EPR), and the Response Surface Methodology in predicting the unconfined compressive strength (UCS) of soil-lime mixtures. This was for purposes of subgrade and landfill liner design and construction. By utilizing input variables such as Gravel, Sand, Silt, Clay, and Lime contents (G, S, M, C, L), the models forecasted the strength values after 7 and 28 days of curing. The accuracy of the developed models was compared, revealing that both ANN and EPR achieved a similar level of accuracy for UCS after 7 days, while the GP model performed slightly lower. The complexity of the formula required for predicting UCS after 28 days resulted in decreased accuracy. The ANN and EPR models achieved accuracies of 85% and 82%, with R 2 of 0.947 and 0.923, and average error of 0.15 and 0.18, respectively, while the GP model exhibited a lower accuracy of 66.0%. Conversely, the RSM produced models for the UCS with predicted R 2 of more than 98% and 99%, for the 7- and 28- day curing regimes, respectively. The RSM also produced adequate precision in modelling UCS of more than 14% against the standard 7%. All input factors were found to have almost equal importance, except for the lime content (L), which had an average influence. This shows the importance of soil gradation in the design and construction of subgrade and landfill liners. This research further demonstrates the potential of ML techniques for predicting the strength of lime reconstituted G-S-M-C graded soils and provides valuable insights for engineering applications in exact and sustainable subgrade and liner designs, construction and performance monitoring and rehabilitation of the constructed civil engineering infrastructure.

Backcalculation of In-situ Nonlinear Viscoelastic Properties of Subgrade Using a Finite Element-Based Machine Learning Approach

Finite Element Geotechnical Analysis Incorporating Deep Learning-Based Soil Model

Elastoplastic Analytical Computation of Long Piles under Combined Lateral Loads

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Calculation of Vehicular Load-Induced Plastic Deformation of Soft Subsoil

Parametric Study of Modified Subgrade Reaction Model Using Artificial Neural Network Approach

Dynamic Response of Reinforced Unpaved Subgrade Subjected to Moving Loads

A method for predicting the cumulative deformation of high-speed railway subgrades under cyclic train loads

Three-dimensional Numerical Simulation of Dynamic Compaction of Backfilled Soil

BP Artificial Neural Network-based Backcalculation of Subgrade Resilient Moduli

Experimental validation of a numerical model for prediction of the dynamic response of ballastless subgrade of high-speed railways

Modeling the influence of lime on the unconfined compressive strength of reconstituted graded soil using advanced machine learning approaches for subgrade and liner applications

Developing an Advanced ANN-based Approach to Estimate Compaction Characteristics of Highway Subgrade

Numerical modelling and analysis for nonlinear stiffness of subgrade soil subject to 3-D vehicle-track interaction

Experimental Study of Estimating Sub-grade Moduli by Falling Weight Deflectometer

Back-calculating method for subgrade modulus based on virtual inertial points

Backcalculation of subgrade resilient modulus using deflection basin

A Machine Learning Method for Inclinometer Lateral Deflection Calculation Based on Distributed Strain Sensing Technology

Numerical Simulation Analysis On Dynamic Stress Of Railway Subgrade Under Heavy Haul Condition

Numerical implementation of suction-dependent resilient modulus constitutive model for subgrade granular material

A FEM-based method to implement the model of dynamic resilient modulus