Abstract:A Discrete Element Method (DEM), a computerized testing rig and a soil bin were used to explain soil profile deformation caused by mouldboard plough. By using DEM, the motion of particles is given by collisions between particles. Soil-tillage tool interaction simulation was established by a 3D geometry of a mouldboard plough created using PTC Creo Parametric 3D Modelling software and soil bed modeled by discrete element particles using EDEM software. A bond element was introduced between particles and cohesion of soil was formed to create a simulation of the actual cohesive soil. The horizontal and vertical forces and soil disturbance in terms of bulk density at different speeds and depths were investigated. However, the simulation experiments followed the field experiments which were conducted using a computerized testing rig. Further, reaction forces on the plough and the resulting bulk densities were estimated from the simulated results and compared with the actual results from the field. Also, the accuracy of the developed model to predict soil displacement was measured and compared with the soil bin data with the average relative error of 1.317%. The simulated results of horizontal, vertical forces and bulk density matched well with the results obtained in the field experiment with the relative error of 4.435, 3.029 and 3.119% respectively. The vertical force provided the best regression results of 0.9948 <math>R2</math> with <math>RMSE</math> of 0.5964, followed by 0.9884 <math>R2</math> with <math>RMSE</math> of 0.4089 and 0.8391 <math>R2</math> with <math>RMSE</math> of 0.5441 for horizontal force and bulk density respectively. All regression results were obtained at <math>p<0.05</math>. The ANOVA test showed that the p-values for the horizontal force, vertical force and bulk density were 0.753, 0.695 and 0.025 respectively. There was no significant difference between the simulation and experiment results for cutting forces while there was a significant difference for the bulk density at <math>p<0.05</math>. This model can be applied as an accurate, consistent and fast method of effective prediction of the final soil condition and forces needed for tillage operation.

Analysis Of The Dynamic Mechanical Behavior Of Soil Body Through Particle Motion By Distinct Element Method

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Simulation of Front End Loader Bucket–soil Interaction Using Discrete Element Method

Simulation of dynamic behavior of soil ahead of the bulldozing plates with different surface configurations by discrete element method

Simulation on dynamic behavior of dry soil ahead of the bulldozing plate with different cutting angles by DEM

DEM Analyses of the Mechanical Behavior of Soil and Soil-Rock Mixture Via the 3D Direct Shear Test

Simulation of Track-Soft Soil Interactions Using a Discrete Element Method

Coupled Two-Dimensional Discrete Element and Multibody Dynamic Modeling for Interaction of the Soil and Rough Shaped Rigid Bodies

Prediction of cutting forces and soil behavior with discrete element simulation

Review on Numerical Simulation of the Internal Soil Erosion Mechanisms Using the Discrete Element Method

Modeling the interaction of soil and a vibrating subsoiler using the discrete element method

Analysis of the movement behaviour of soil between subsoilers based on the discrete element method

Discrete Element Modelling of a Soil-Rock Mixture Used in an Embankment Dam

Interaction between soil and a wide cutting blade using the discrete element method

Application of Distinct Element Method in Dynamic Analysis of High Rock Slopes and Blocky Structures

Effect of soil particle size on soil-subsoiler interactions using the discrete element method simulations

Measuring System for Mechanical Analysis of Disturbed Soil Based on Virtual Instrument Technology

3D DEM analysis of soil excavation test on lunar regolith simulant

Effect of soil particle-size distribution (PSD) on soil-subsoiler interactions in the discrete element model

Research status of distinct element method particle flow analysis method and its application in deep sea core drilling

A coupled MPM-DEM method for modelling soil-rock mixtures