Abstract:Concrete and cement have been widely used in past decades as a result of urbanization. More and more supplementary cementitious materials are adopted in concrete because its production complements environmental conservation. The influence of slag, fly ash, limestone, etc., on compressive strength of concrete is of interest to engineers worldwide. Many previous studies were specific to certain engineering or certain experiments that could not reveal the nature of the influence of the three supplementary cementitious materials on concrete’s compressive strength. The research concerning the influence of two or more kinds of supplementary cementitious materials on concrete’s compressive strength is still unclear. Moreover, there is a lack of clarity on the optimum proportion of one or more certain cementitious materials in practical engineering or experiments. To overcome these problems, this study adopts the concrete compressive strength development over time (CCSDOT) model, which generates an explicit formula to conduct quantitative research based on extensive data. The CCSDOT model performs well in fitting the compressive strength development of concrete containing cement, slag, fly ash, and limestone flour. The results reveal the nature of the influence of the three supplementary cementitious materials on concrete’s compressive strength through the parameter analysis in the model. Two application cases are analyzed concerning the selection of the three supplementary cementitious materials and design of concrete mix proportion for practical engineering. It is concluded that the CCSDOT model and the method in this study can possibly provide guidance on both the selection of supplementary cementitious materials and the design of optimal concrete mix proportion for practical engineering. Therefore, the study is highly essential and useful.

Experimental Study of Low Cement Dosage Self-Compacting Concrete Mix Design

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

New method of mix design for self-compacting concrete based on aggregate information

Study on Mix Proportion Design Method of Concrete Based on the Theory of High Packing

Experimental study on strength and abrasion-resistance enhancement admixture

Research on a Mix Design Method of Self-Compacting Concrete Based on a Paste Rheological Threshold Theory and a Powder Equivalence Model

The Influence and Application of Slag, Fly Ash, and Limestone Flour on Compressive Strength of Concrete Based on the Concrete Compressive Strength Development over Time (CCSDOT) Model

Long Age Mechanical Properties and Application of Self-Compacting Concrete

Optimum Design of Low-Binder Self-Compacting Concrete Based on Particle Packing Theories

Improved Powder Equivalence Model for the Mix Design of Self-Compacting Concrete with Fly Ash and Limestone Powder

Research on the C30 and C40 concretes prepared with low-quality raw materials

Experimental study on new variety of cement-stabilized soil

Experimental Research on Aerated Concrete Preparation with Low-Silicon Tailings of Copper Mine

An Enhanced Mix Design Method of Self-Compacting Concrete with Fly Ash Content Based on Paste Rheological Threshold Theory and Material Packing Characteristics

A New Model to Predict the Optimal Mix Design of Self-Compacting Concrete Considering Powder Properties and Superplasticizer Type

Investigation of self-compacting concrete utilizing different supplementary pozzolanic materials for cement replacement

Performance and Uniformity of Self-Compacting Concrete

Development of a Mix Design Method for SCC Based on the Rheological Characteristics of Paste

Influence of Mixture Proportions on Fresh and Mechanical Properties of Self-consolidating Concrete

Design of self-compacting ultra-high performance concrete (SCUHPC) towards to the cementitious materials packing optimization

Influence of Chemical admixture dosage on Fresh Properties of Self-compacting concrete